JVC HR-J638E/EH Select Channel to Watch, SET Counter Display, Reset Counter, Engage ITR Mode

		6
		q
PROG.		RECORD
TV		DISPLAY
	2
1	2	3
4	5	6
7	8	9

EN19

Record One Programme

While Watching Another

If your recorder is connected to the TV via AV connection, . . .

. . . press TV/VIDEO. The recorder's VIDEO indicator and the TV broadcast being recorded disappear.

SELECT CHANNEL TO

WATCH

1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the TV PROG. button is recorded on the tape.

●If a decoder is connected to the recorder (☞ pg. 4), you can select a scrambled channel as well with the TV channel controls.

Elapsed Recording Time

Indication

You can check the exact time of a recording.

C.RESET

0

TV PROG.

SET COUNTER DISPLAY

Press DISPLAY until a counter reading appears on the

1 dispay panel.

TV/VIDEO

3 1

2	RESET COUNTER
	Press C. RESET before starting recording or playback.
	● The counter is reset to “0:00:00” and shows the exact
	elapsed time as the tape runs.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

START RECORDING

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. ITR blinks and 0:30 appears on the front display panel.

SET RECORDING DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.