INSTALLING
YOUR
NEW
RECORD
ER
EN
3
Basic Connections
It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-
PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.
CHECK CONTENTS |
Make sure the package contains all of the accessories |
1 listed in “Specifications” (☞ back cover). |
SITUATE RECORDER |
Place the recorder on a stable, horizontal surface. |
Back of TV
Aerial terminal
RF Cable (provided)
Mains Power
Cord
TV Aerial
Cable
RF output channel adjustment screw
2 |
|
| CONNECT RECORDER TO |
3 | TV |
The connection method you use depends on the type | |
of TV you have. | |
RF CONNECTION | |
| ● To Connect To A TV With NO AV Input Terminals . . . |
| a– Disconnect the TV aerial cable from the TV. |
| b– Connect the TV aerial cable to the ANT. IN jack |
| on the rear panel of the recorder. |
| c– Connect the provided RF cable between the RF |
| OUT jack on the rear panel of the recorder and |
| the TV’s aerial terminal. |
| Before operating the recorder, make sure the |
| TV’s channel is set to the VIDEO channel. |
AV CONNECTION
●To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per “RF
CONNECTION”.
b– Connect an optional SCART cable between the
AV1 IN/OUT socket on the rear panel of the recorder and the TV’s
c– Set the RF TEST switch to OFF.
Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.
Rear View
RF TEST switch
Mains outlet
AUDIO OUT(put) connectors
For connection to the audio input connctors on a
CONNECT RECORDER TO MAINS
4 Plug the end of the mains power cord into a mains outlet.
Tune The TV
To Your Video
Recorder
The video recorder sends picture and sound signals via the RF connecting cable to your TV on UHF channel 36.
1 |
| TURN ON THE RECORDER |
| Press OPERATE. | |
2 |
| SELECT OUTPUT MODE |
| Set the RF TEST switch on the back of the recorder to | |
| ON. |
