JVC HR-J638E/EH Preparation, Turn The Recorder On, Access Clock Set Screen, Just Clock

EN

7

Clock Set

Turn on the TV and select the VIDEO channel (or AV mode).

OPERATE

6

q

If you performed Auto Channel Set (☞ pg. 5), the recorder’s built-in clock is also set automatically. The Auto and Manual clock setting procedures are necessary when . . .

–a power outage of more than 60 minutes occurs.

–the tuner has been set manually.

–the user desires to set the clock slightly ahead of the actual time.

–the clock was not set even after Auto Tuner Set was performed.

Whether you perform Auto or Manual clock setting, you can use the convenient Just Clock function.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option appears in the Clock Set and Auto Clock screens, and can be set “ON” or “OFF” (the default setting is “ON”). Press OK until the Just Clock setting begins blinking, then press PUSH JOG%Þto change the setting.

IMPORTANT: If you turn off Just Clock off, the accuracy of your recorder’s built-in clock may be reduced, which could adversely effect timer recording.

Both Auto and Manual clock setting procedures begin from step 3.

OPERATE

	2
1	2	3

CLOCK	5	6
4
7	8	9
	0

TV/VIDEO

Preparation

1	TURN THE RECORDER ON
	Press OPERATE.
2	ACCESS CLOCK SET SCREEN
	Press CLOCK on the	CLOCK SET
	remote control. The Clock
		TIME	DATE	YEAR
	Set screen appears.
		0: 00	01 . 01	00
		JUST	CLOCK: ON
		TV PR.	1
		[5]: AUTO CLOCK
		[5°] =
		[CLOCK] : EXIT

CONTINUED ON NEXT PAGE.

3

1

OK

PUSH JOG