JVC HR-J638E/EH specifications Regular Timer Programming, Enter Programme Stop Time

24ENTIMERRECORDING(cont.)

Regular Timer Programming

If you don’t know the SowView number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

Remember, the clock must be set before you can programme the timer (☞ pg. 7).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

ACCESS TIMER PROGRAM- MING SCREEN

1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
	Press START +/–. (If you’re		– P1 –
	just starting out, “P1”	START	STOP
2 appears.)
		– : – –	= – : – –
		SP		ON
		DATE	TV PROG
		25. 12		– –
		[+/–] =

The front display panel looks like this:

SP

	ENTER PROGRAMME
	START TIME
	Press START +/– to enter			– P1 –
	the time you want
3 recording to start.			START	STOP
			21 : 00	= – : – –
	● Press and hold START		SP		ON
	+/– to move in 30-		DATE	TV PROG
	minute increments, or		25. 12		– –
	press and release		[+/–] =
	repeatedly to move 1
	minute at a time.
	The front display panel looks like this:
		SP

ENTER PROGRAMME STOP TIME

	Press STOP +/– to enter the time you want recording to
4 stop.
5	ENTER PROGRAMME DATE
	Press DATE +/–. (The current date appears on screen.
	The date you enter appears in its place.)
	ENTER CHANNEL
6	POSITION
	Press TV PROG. +/–.					– P1 –
	● If you’re not receiving				START	STOP
	PDC/VPS, press NUMBER				21 : 00	= 22 : 00
	key “7” to set		to		SP		ON
	"OFF" (☞ pg. 25).				DATE	TV PROG
					25. 12	1
				[+/ –] =			ARD
		SP
		D	M
	SET TAPE SPEED
7 Press SP/LP to set the tape speed.
	RETURN TO NORMAL
8	SCREEN
	After confirming all information is correct, press OK
	and the normal screen appears.

●Repeat steps 1–8for each additional programme.

ENGAGE RECORDER’S

TIMER MODE

9 Press TIMER.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday).

NOTES:

●To timer-record from a satellite tuner connected to your recorder's AV2 IN/DECODER connector, press TV PROG. +/– in step 6 above to set the channel position to "AUX2".

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 25).