JVC HR-J638E/EH Edit To Or From Another Video Recorder, Make Connections, Start Source Player

26EN

EDITING

Edit To Or

From Another

Video

Recorder

2

1 2 3

4 5 6

7 8 9

NUMBER "0" 0

TV PROG.

You can use your video recorder as the source player or the recording deck.

1	MAKE CONNECTIONS
	Connect the player’s AUDIO/VIDEO OUT connector to
	the recorder’s AUDIO/VIDEO IN connector.
	When Using Your Video Recorder As The Source
	Player . . .
	. . . connect its AV1 IN/OUT connector to the recording
	deck.
	When Using Your Video Recorder As The Recording
	Deck . . .
.	. . . you can use the AV1 IN/OUT or AV2 IN connectors.

SET RECORDING DECK’S INPUT MODE

2 Set to AUX. With this video recorder, press NUMBER Key "0" or TV PROG. to select depending on the connector being used — “AU 1” for the AV1 IN/OUT connector, or “AU 2” for the AV2 IN connector.

●When using the AV2 IN connector, make sure the AV2 SELECT switch is set to "AV2".

START SOURCE PLAYER

3 Engage its Play mode.

START RECORDING DECK

4 Engage its Record mode.

3

1

NOTE:

All necessary cables can be obtained from your dealer.

TV Receiver	Player	Your recorder	Recorder	Your recorder	TV Receiver
VIDEO	AV2 SELECT		AV2 SELECT
	switch	21-pin SCART Cable	switch			VIDEO
CHANNEL
						CHAN-
		(not provided)
			21-pin SCART
				RF Cable (provided)		NEL
RF Cable (provided)
			Cable (not provided)
	Another recorder		Another recorder
	Recorder		Player