12ENINITIALSETTINGS(cont.)
MENU
Semi-Auto
You can change the Host Channel/D.S.T. /Time Zone setting manually.
OK
CH
1 2 3
2
4 5 6
7 8 9
0 4
1
3 | OK |
MENU
SHUTTLE PLUS
5
6
7
SET AUTO CLOCK TO ON
At the Clock Set screen, press OK or SHUTTLE PLUS #repeatedly to move the highlight bar to "AUTO CLOCK" and press CH 5° or SHUTTLE PLUS %Þ to set to "ON".
a– To select the Host Channel — go to step 6
b– To select the D.S.T. mode — go to step 7 c– To select the Time Zone — go to step 8
NOTE:
The time that has been set previously will be erased when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME ZONE" setting is changed.
SELECT HOST CHANNEL
You can either select "AUTO" or enter a PBS channel number. Move the highlight bar to "HOST CH" by pressing OK or SHUTTLE PLUS #, then press CH 5° or SHUTTLE PLUS %Þ to set to "AUTO" or the desired PBS channel number.
NOTE:
There are some PBS channels that do not transmit clock setting data.
SELECT D.S.T. MODE
You have three choices:
a– Select "AUTO" and the adjustment to your VCR's clock will be made according to the incoming signal from the host channel.
b– Select "ON" and the adjustment will be made based on the clock itself.
c– Select "OFF" if Daylight Saving Time does not apply to you.
Move the highlight bar to "D.S.T." by pressing OK or SHUTTLE PLUS #, then press CH 5° or SHUTTLE PLUS %Þ to select the desired mode.
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.