JVC Front AUX Input appears only with HR-S4600U, Plus %Þto move, Plus # to set to OFF, On pg

FUNCTION

=VIDEO CALIBRATION ON

PICTURE CONTROL AUTO

AUTO TIMEROFF

SUPERIMPOSE ON

AUTO SP=EP TIMER OFF

VIDEO STABILIZER OFF NEXT PAGE

SELECT WITH (5,°) AND (OK)

PRESS (MENU) TO END

6

7

SELECT AUX INPUT SET MODE

a– FRONT S-VIDEO IN (HR-S4600U only) : Move the highlight bar (arrow) to "FRONT AUX INPUT" by pressing CH 5° or SHUTTLE PLUS %Þ, then press OK or SHUTTLE PLUS # to set to "S-VIDEO".

b– FRONT VIDEO IN (HR-S4600U only) : Move the highlight bar (arrow) to "FRONT AUX INPUT" by pressing CH 5° or SHUTTLE PLUS %Þ, then press OK or SHUTTLE PLUS # to set to "VIDEO".

c– REAR S-VIDEO IN: Move the highlight bar (arrow) to "REAR AUX INPUT" by pressing CH 5° or SHUTTLE PLUS %Þ, then press OK or SHUTTLE PLUS #to set to "S-VIDEO".

d– REAR VIDEO IN: Move

the highlight bar (arrow) to "REAR AUX

INPUT" by pressing CH 5° or SHUTTLE PLUS %Þ, then press OK or SHUTTLE PLUS # to set to "VIDEO".

	PREVIOUS PAGE			PREVIOUS PAGE
	2ND AUDIO RECORD	OFF		2ND AUDIO RECORD	OFF
	AUDIO MONITOR	HI-FI		AUDIO MONITOR	HI-FI
	S-VHS MODE	ON		S-VHS MODE	ON
	AV COMPU-LINK	ON		AV COMPU-LINK	ON
	= FRONT AUX INPUT S-VIDEO			FRONT AUX INPUT	VIDEO
	REAR AUX INPUT	VIDEO		=REAR AUX INPUT S-VIDEO
SELECT WITH (5,°) AND (OK)			SELECT WITH (5,°) AND (OK)
PRESS (MENU) TO END			PRESS (MENU) TO END

"FRONT AUX INPUT" appears only with HR-S4600U.

SELECT “EDIT” FOR PICTURE CONTROL SET MODE

Follow the “Picture Control” section on page 26, then select “EDIT.”

If you are using a JVC Master Edit Control-equipped camcorder — go to step 8.

If you are not using a JVC Master Edit Control- equipped camcorder — go to step 9.

NOTE:

When you select “EDIT” to dub tapes, be sure to select “AUTO” or (“NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes.

EN49

	ENABLE REMOTE PAUSE
8	FUNCTION
	Press CH 5° or SHUTTLE		FUNCTION
	PLUS %Þto move the		=VIDEO CALIBRATION	ON
			PICTURE CONTROL	AUTO
	highlight bar (arrow) to
			AUTO TIMER	OFF
	"AV COMPU-LINK", then		SUPERIMPOSE	ON
	press OK or SHUTTLE		AUTO SP=EP TIMER	OFF
	PLUS # to set to "OFF".		VIDEO STABILIZER	OFF
			NEXT PAGE
		SELECT WITH (5,°) AND (OK)
	The REMOTE PAUSE/AV
		PRESS (MENU) TO END
	COMPU-LINK connector
	works as the AV
	Compulink Playback
	connector when "AV		PREVIOUS PAGE
	COMPU-LINK" is set to		2ND AUDIO RECORD	OFF
	"ON" ( pg. 31), and		AUDIO MONITOR	HI-FI
			S-VHS MODE	ON
	works as the Remote		=AV COMPU-LINK	OFF
	Pause connector when		FRONT AUX INPUT	VIDEO
	"AV COMPU-LINK" is set		REAR AUX INPUT	VIDEO
	to "OFF".
		SELECT WITH (5,°) AND (OK)
	"FRONT AUX INPUT"	PRESS (MENU) TO END
	appears only with
	HR-S4600U.

	RETURN TO NORMAL SCREEN
9 Press MENU.
	START PLAYER
10 NOTE:Set the camcorder to its play mode.
	If the camcorder is equipped with a superimpose/OSD
	disable feature then set its superimpose or display
	feature to OFF before pressing play.
11	START RECORDER
	Set your VCR to its record mode.
	If you are using a Master Edit Control-equipped JVC
	camcorder, it can put the recorder automatically into
	Record mode. (Refer to camcorder's instruction
	manual.)

NOTES:

If you use an auxiliary input to connect a cable box or DBS receiver, make sure that the correct AUX INPUT mode ("VIDEO" or "S-VIDEO") is selected after you have finished editing ( steps 4 – 6 on pg. 48 and 49).