JVC HR-S4600U instruction manual Start Repeat, Stop Repeat

28EN

PLAYBACKANDRECORDINGFEATURES(cont.)

POWER PLAY

JOG

SHATTLE

PAUSE

Repeat Playback

START REPEAT

1 Press and hold PLAY (until " " blinks on the front display panel) during playback, then release.

SP

VCR

REVIEW

1 2 3

2

4 5 6

7 8 9

STOP SHUTTLE

POWER

DISPLAY

	The entire tape is played back 50 times.
2	STOP REPEAT
	To stop, press STOP at any time.
	NOTE:

Pressing PLAY, REW, FF, PAUSE or SHUTTLE PLUS

“or £ also stops Repeat Playback.

Counter Reset

RESET COUNTER TO ZERO

Press C.RESET.

C.RESET

0 4

PLAY

TIMER

1 NOTE:

By pressing the DISPLAY button, you can change the

display to show the counter reading, channel number,

clock time or tape remaining time. (Channel number is

not displayed during playback.)

1

FF

REW

PAUSE

STOP

3

SHUTTLE PLUS

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
use the SHUTTLE ring, or perform
an Index Search or Instant ReView.
The position of "	" in relation to	B	+	+	+		E
"B" (Beginning) or "E" (End) shows
				COUNT		0:33:27
you where you are on the tape.

Instant ReView

At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer-recorded program.

1	ACTIVATE INSTANT REVIEW
	After ensuring that the Timer mode is disengaged, press
	REVIEW.
	The power comes on and the VCR rewinds to the index
	code indicating the start of the last timer-recorded
	program, then begins playback automatically.
	You can access a program 2–9 index codes away
	from the current position on the tape. If, for example,
	you have 5 programs recorded and you want to watch
	the third one, press REVIEW three times.
	If necessary press REW or FF when play starts to
	search visually to find the very beginning of the
	desired program.
	If the tape is already rewound when REVIEW is
	pressed, it will play the tape from the beginning. It
	will not fast forward to an index code.
	The Instant Review function will also operate if the
	VCR's power is on.

NOTES:

"SUPERIMPOSE" must be set to "ON", or the indicator will not appear ( pg. 29).

It may take a few seconds for the Tape Position Indicator to be displayed.

Next-Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding. Before continuing, ensure that the VCR is in stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer functions if the cassette's record safety tab is removed.