![](/images/new-backgrounds/1280803/28080345x1.webp)
Simple
Recording
Turn on the TV and select the VCR channel 3 or 4 (or AV mode).
PLAY
|
| JOG | |
|
| SHATTLE | |
| PAUSE | STOP/EJECT | |
CH | REC | ||
SP/EP | |||
|
|
V/VCR |
| ENTER |
|
| |
1 | 2 | 3 |
|
| 2 |
E
N
23
| LOAD A CASSETTE |
| Make sure the record safety tab is intact. If not, cover the |
1 hole with adhesive tape before inserting the cassette. | |
| SELECT RECORDING |
| CHANNEL |
| Press CH5° |
| keys, then press ENTER. (The channel changes after a |
2 few seconds whether you press ENTER or not.) | |
| If you use the RF connection, by pressing the TV/VCR |
| button, select VCR mode to view the program to be |
| recorded. |
|
|
| SET TAPE SPEED |
3 Press SP/EP to set the recording speed. | |
4 | START RECORDING |
Press and hold REC and press PLAY on the remote | |
control, or press REC on the VCR's front panel. | |
| |
Video Calibration takes place at the beginning of | |
| both the first SP and the first EP recording after |
| inserting the cassette (when Video Calibration is set |
| to "ON", pg. 32). |
|
|
|
|
| PAUSE/RESUME |
5 | RECORDING |
Press PAUSE. Press PLAY to resume recording. | |
|
NUMBER
4 5 6
7 8 9
0 4
CH
SP/EP
During record pause, you can change the recording |
channel by using the CH5° |
keys. |
Video Calibration will not take place if the tape |
speed is changed while in record pause mode. |
STOP RECORDING |
Press STOP or STOP/EJECT. Then press STOP/EJECT to |
1
PLAY
PAUSE
REC
3
STOP
6 remove the cassette. |
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab