35
9
3
6
8
2
5
7
1
4
0
+
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Record One Program While
Watching Another
Recording
Display Elapsed Recording
Time
ENGAGE TV MODE
1
During recording...
●Press TV/VIDEO. The VCR's VIDEO indicator goes
out. (If you are using the RF connection (Z pg. 6). to
view the output from your VCR, the TV broadcast
being recorded disappears.)
●If you are using the AV connection (Z pg. 6) or S-
VIDEO connection (Z pg. 7), to view the output
from your VCR, change the TV's input mode from AV
to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV’s channel selector to set the channel you
want to watch.
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
●Make sure "SUPERIMPOSE" is set to "ON" (Z pg. 30).
●The indications are not be recorded.
Your VCR can record in either S-VHS or VHS.
●To record in S-VHS, insert a cassette marked "S-VHS".
The S-VHS indicator will light and the S-VHS recording
mode is automatically selected.
●To record in VHS, insert a cassette marked "VHS". The
VHS recording mode is automatically selected.
●You can also record in VHS on S-VHS cassettes. To do
this, after inserting an S-VHS cassette, press the S-VHS
button. The S-VHS indicator will go out.
S-VHS (Super VHS) and VHS
S-VHS
TV/VIDEO
OSD
TV/VIDEO
C.RESET
S-VHS indicator