JVC HR-S7600U manual Select The Soundtrack, Video Stabilizer

Select The Soundtrack

Your VCR can record two soundtracks simultaneously (Normal and Hi-Fi) and play back the selected one, or both together. Or, when viewing a pre-recorded tape that contains two separate Hi-Fi audio programs, you can choose to listen to either one by selecting either "Hi-Fi L" or "Hi-Fi R" in step 3.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS FUNCTION SET
2	SCREEN
	Move the highlight bar (arrow) to "FUNCTION SET" by
	pressing CH5° or TIME SCAN %Þ, then press OK or
	TIME SCAN #.
	SELECT AUDIO MONITOR
3	SET MODE
	Move the highlight bar	FUNCTION
	(arrow) to "AUDIO
		=VIDEO CALIBRATION	ON
	MONITOR" by pressing	AUTO TIMER	OFF
	CH 5° or TIME SCAN	PICTURE CONTROL	AUTO
		SUPERIMPOSE	ON
	%Þ, then press OK or	AUTO SP=EP TIMER	OFF
	TIME SCAN # to select the	DIGITAL R3	ON
	desired mode:	NEXT PAGE
	a– Hi-Fi	SELECT WITH (5,°) AND (OK)
		PRESS (MENU) TO END
	b– Hi-Fi L
	c– Hi-Fi R
	d– Normal
	e– Mix	PREVIOUS PAGE
		VIDEO STABILIZER	OFF
		2ND AUDIO RECORD	OFF
		=AUDIO MONITOR	HI-FI
		S-VHS MODE	ON
		AV COMPU-LINK	ON
		TIMESCAN AUDIO	ON
		NEXT PAGE
		SELECT WITH (5,°) AND (OK)
		PRESS (MENU) TO END
	RETURN TO NORMAL
4	SCREEN
	Press MENU.

NOTES:

●If the tape being played back has no Hi-Fi soundtrack, the Normal soundtrack will be heard no matter what choice you make in step 3.

●If RF connection is used for TV, even if Hi-Fi audio monitor is selected the sound will be mono and will be reproduced in both loudspeakers.

EN27

Video Stabilizer

By activating the Video Stabilizer you can correct vertical vibrations in the picture when playing back unstable EP recordings that were made on another VCR. When this function is set to "ON", vertical vibration will be automatically corrected. *The default setting is "OFF".

		ACCESS MAIN MENU
1		SCREEN
		Press MENU.
		ACCESS FUNCTION SET
2		SCREEN
		Move the highlight bar		MAIN MENU
		(arrow) to "FUNCTION
		SET" by pressing CH5° or		=FUNCTION SET
				TUNER SET
		TIME SCAN %Þ, then		INITIAL SET
		press OK or TIME SCAN		HI-FI REC LEVEL CTL
	#.
				PRESS (5,°), THEN (OK)
				PRESS (MENU) TO END
3		ACTIVATE VIDEO STABILIZER
		Move the highlight bar		FUNCTION
		(arrow) to "VIDEO
			=VIDEO CALIBRATION		ON
		STABILIZER" by pressing
				PICTURE CONTROL	AUTO
		CH 5° or TIME SCAN		AUTO TIMER	OFF
		%Þ, then press OK or		SUPERIMPOSE	ON
				AUTO SP=EP TIMER	OFF
		TIME SCAN #to set to
			=DIGITAL R3		ON
		"ON".		NEXT PAGE
			SELECT WITH (5,°) AND (OK)
			PRESS (MENU) TO END
				PREVIOUS PAGE
			=VIDEO STABILIZER		ON
				2ND AUDIO RECORD	OFF
				AUDIO MONITOR	HI-FI
				S-VHS MODE	ON
				AV COMPU-LINK	ON
				TIMESCAN AUDIO	ON
				NEXT PAGE
			SELECT WITH (5,°) AND (OK)
			PRESS (MENU) TO END
		RETURN TO NORMAL
4		SCREEN
		Press MENU.

NOTES:

●When you finish viewing the tape, be sure to set it back to "OFF".

●Regardless of the setting, this function has no effect during recording and during special-effects playback.

●The Superimpose mode indications may jitter vertically when "VIDEO STABILIZER" is set to "ON".

●To watch recordings with close-caption, it is necessary to set the Video Stabilizer function to "OFF".

HR-S7600U-EN24-44 27 99.4.28, 2:03 PM