JVC HR-S7600U manual Start Repeat, Stop Repeat

28EN

PLAYBACKANDRECORDINGFEATURES(cont.)

POWER				PLAY
				−	+
STOP				PAUSE	SCAN SHUTTLE
					TIME
				POWER
REVIEW
1	2	3		DISPLAY
4	5	6	2

Repeat Playback

1	START REPEAT
	Press and hold PLAY (until " " blinks on the front
	display panel) during playback, then release.
		+8
		4		SP
		0
		6
		–15dB	VCR
		L NORM R
	● The entire tape is played back 50 times.
2	STOP REPEAT
	To stop, press STOP at any time.
	NOTE:

Pressing PLAY, REW, FF, PAUSE or TIME SCAN ªor

£also stops Repeat Playback.

Counter Reset

7 8 9

RESET COUNTER TO ZERO

C.RESET

0 4

PLAY

TIMER

1	Press C.RESET.
	NOTE:
	By pressing the DISPLAY button, you can change the
	display to show the counter reading, channel number,
	clock time or tape remaining time. (Channel number is

1

FF

REW

PAUSE

STOP

3

TIME SCAN

Instant ReView

At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer-recorded program.

1	ACTIVATE INSTANT REVIEW
	After ensuring that the Timer mode is disengaged, press
	REVIEW.
	● The power comes on and the VCR rewinds to the index
	code indicating the start of the last timer-recorded
	program, then begins playback automatically.
	● You can access a program 2–9 index codes away
	from the current position on the tape. If, for example,
	you have 5 programs recorded and you want to
	watch the third one, press REVIEW three times.
	● If necessary press REW or FF when play starts to
	search visually to find the very beginning of the
	desired program.
	● If the tape is already rewound when REVIEW is
	pressed, it will play the tape from the beginning. It
	will not fast forward to an index code.
	● The Instant Review function will also operate if the
	VCR's power is on.

not displayed during playback.)

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
use the TIME SCAN SHUTTLE ring,
or perform an Index Search or
Instant ReView. The position of	B	+	+	+	E

" " in relation to "B" (Beginning)

or "E" (End) shows you where youCOUNT 0:33:27 are on the tape.

NOTES:

●"SUPERIMPOSE" must be set to "ON", or the indicator will not appear (☞ pg. 29).

●It may take a few seconds for the Tape Position Indicator to be displayed.

Next-Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding. Before continuing, ensure that the VCR is in stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer functions if the cassette's record safety tab is removed.

HR-S7600U-EN24-44 28 99.4.28, 2:03 PM