JVC HR-S7600U manual Access Skip Menu, Perform Movie, Movie Advance, Select Mode

LAY	SKIP SEARCH
1

3 OK

MENU

TIME SCAN

ATTENTION

Movie Advance and Movie Advance (Preview) work only on prerecorded cassettes that have been recorded in the SP mode, and have no safety tab. If the VCR detects the EP mode after you press OK in step 4, the following screen appears.

MOVIE ADVANCE

MOVIE ADVANCE CAN NOT

BE SELECTED FOR EP

RECORDINGS.

PRESS (SKIP) TO CANCEL

Skip Search will work for prerecorded

EP tapes.

When "MOVIE ADVANCE" is selected...

●If you want to stop searching for the start of the movie, simply press SKIP SEARCH or STOP.

When "MOVIE ADVANCE (PREVIEW)" is selected...

●If SKIP SEARCH was inadvertently pressed, press it again to resume normal playback.

●While the VCR is searching for the next preview, if you see a preview you wish to view, press SKIP SEARCH and the VCR will immediately go to the start of that preview.

●If the VCR starts to reverse to a preview you do not wish to view, press SKIP SEARCH to initiate searching to the next preview.

NOTES:

●Normally there is a period of black and no audio at the beginning and end of previews. The Movie Advance feature detects those parts where the picture fades to black and the audio fades to silence, and initiates fast-motion to skip over the detected previews.

●Some previews may not be detected and Movie Advance may not work properly.

●The setting you selected in step 3 remains in effect until the cassette is ejected.

●"MOVIE ADVANCE (PREVIEW)" does not use TimeScan when searching for the next preview.

Patents Pending

EN31

Movie Advance

This feature helps you locate certain parts of prerecorded movies (rented or purchased) and works in two ways.

●You can go to the beginning of the movie, skipping over all previews.

●You can fast-motion the tape to the beginning of the next preview, so you can skip over previews one by one.

1	LOAD A CASSETTE
	Insert a cassette that has a prerecorded movie (rented or
	purchased), with no safety tab, into the VCR. Playback
	begins automatically.
	ACCESS SKIP MENU
2	SCREEN
	Press SKIP SEARCH.
3	SELECT MODE
	Press CH5° or TIME		SKIP MENU
	SCAN %Þ to move the
	highlight bar (arrow) to		=MOVIE ADVANCE	(PREVIEW)
			MOVIE ADVANCE
	your choice.		SKIP SEARCH
	a– Select "MOVIE
		ADVANCE" if you want
		to advance directly to
			PRESS (5,°), THEN (OK)
		the beginning of the
			PRESS (SKIP) TO CANCEL
		movie.
	b– Select "MOVIE ADVANCE (PREVIEW)" if you want
		to advance to the next preview.
	c– Select "SKIP SEARCH" if you do not want to perform
		Movie Advance, then press OK and the VCR enters
		stop mode. To activate the Skip Search function, see
		page 35.
	PERFORM MOVIE
4	ADVANCE
	a– If you selected "MOVIE ADVANCE" in step 3 and
		press OK, the following screen will appear with a
		blue background. The VCR will rewind the
		beginning of the tape, then will fast-motion to the
		beginning of the movie. "READY" will appear and
		blink when the beginning of the movie is detected
		and the Stop mode will be engaged. Press PLAY to
		view the movie.
		MOVIE ADVANCE	MOVIE ADVANCE
		SEARCHING FOR BEGINNING	READY
		OF MOVIE.
			PRESS (PLAY) TO START
		PRESS (STOP) TO CANCEL	PRESS (STOP) TO CANCEL
	b– If you selected "MOVIE ADVANCE (PREVIEW)" in
		step 3 and press OK, the VCR will fast-motion to the
		beginning of the next preview and normal playback
		will resume when it is detected.
		Each press of SKIP SEARCH fast-motions to the
		beginning of the next preview, thereby skipping over
		one preview each time.
		The tape will forward-search a little past the start of
		the next preview, then will reverse-serach to the
		beginning of the preview and start playback.

HR-S7600U-EN24-44 31 99.4.28, 2:03 PM