Fender B-DEC 30 manual Amp Mode, FX/Reverb Mode

B-DEC 3O 

Amp Mode

Use Amp Mode to select an amplifier type (first menu), then modify that amplifier’s settings in menus 2–8.

Menu Amp Menu Items Settings—(Function)

1	AMP TYPE
2	GAIN

3AMP VOLUME

4MID FREQUENCY

5CONTOUR

6COMPRESSOR

7TIMBRE

8NOISE GATE

Modern FBA, Dirty FBA, Bassman, Bman Grind, LA Session, Rockin Peg, 80's Tone, Brit Grit, Upright 1-10 — (Adjusts amplifier distortion level.)

1-10 — (Adjusts the volume of the current amplifier relative to other presets.)

200–2kHz — (if AMP TYPE is Modern FBA, or Dirty FBA), 150–4kHz — (if AMP TYPE is Rockin Peg), 200–800Hz — (if AMP TYPE is LA Session), 275–1kHz — (if AMP TYPE is 80's Tone), N/A - (if AMP TYPE is Bassman, Bman Grind, Brit Grit, or Upright.)

1-10 — (Adjusts level of Mid-frequency cut, see diagram A. Adjusts low pass filter if AMP TYPE is Bassman, Bman Grind, Brit Grit, or Upright, see diagram B), N/A- (if the AMP TYPE is Rockin Peg.)

A B

Off, Low, Medium, High, — (Moderates volume range and provides sustain.)

None, Bass Boost, Bright, Punch, Scoop, Mid Bump — (Tone filters.)

Off, Low, Medium, High, — (Cuts low volume noise.)

FX/Reverb Mode

Use FX/Reverb Mode to select an effect type (first menu), then modify that effect’s settings in menus 2–6.

	Effect Type	Effect Settings (for the Effect selected in Menu 1)
	Menu 1	Menu 2	Menu 3	Menu 4	Menu 5	Menu 6
	NONE	—	—	—	—	—
	OVERDRIVE	Level	Gain	Low Tone	Mid Tone	High Tone
	FUZZ	Level	Gain	Octave Level	Low Tone	High Tone
	SINE CHORUS	Level	Rate	Depth	Reverse Delay	Band Split
	TRIANGLE CHORUS	Level	Rate	Depth	Average Delay	Band Split
	SINE FLANGE	Level	Rate	Depth	Feedback	Band Split
	TRIANGLE FLANGE	Level	Rate	Depth	Feedback	Band Split
	PHASER	Level	Rate	Depth	Feedback	Band Split
	TOUCH WAH	Level	Response	Minimum Frequency	Maximum Frequency	Voice Type
	FIXED WAH	Level	Frequency	Minimum Frequency	Maximum Frequency	Voice Type
ENVELOPE CONTROLLED FILTER		Level	Mode	Filter Type	Q	Threshold
	AUTOSWELL	Level	Attack	Depth	Response	Rate
	MONO DELAY	Level	Delay Time	Feedback	Brightness	Input Level
	OVERDRIVE DELAY	Level	Gain	Delay Level	Delay Time	Feedback
	FUZZ DELAY	Level	Gain	Delay Level	Delay Time	Feedback
	CHORUS DELAY	Level	Rate	Depth	Delay Time	Feedback
	FLANGE DELAY	Level	Rate	Depth	Delay Time	Feedback
	PHASE DELAY	Level	Rate	Depth	Delay Time	Feedback
	TOUCH WAH FUZZ	Level	Gain	Response	Octave Mix	Voice Type

Use FX/Reverb Mode to select a reverb type (menu 7), and adjust reverb level (menu 8).

Reverb Type	Reverb Level
Menu 7	Menu 8
NONE	------
AMBIENT	1-10
SMALL ROOM	1-10
LARGE HALL	1-10

FENDER.COM