Important Safety Instructions
•This symbol warns the user of dangerous voltage levels localized within the enclosure of the unit.
•This symbol advises the user to read all accompanying literature for safe operation of the unit.
•Read, retain, and follow all instructions. Heed all warnings.
•Only connect the electric line cord to an earth grounded AC receptacle in accordance with the voltage and frequency ratings listed under INPUT POWER on the rear panel of this product.
•WARNING: To prevent damage, fire or shock hazard, do not expose this unit to rain or moisture.
•Unplug the AC power line cord before cleaning the unit exterior (use a damp cloth only). Wait until the unit is completely dry before reconnecting it to power.
•Maintain at least 6 inches of unobstructed air space behind the unit to allow for proper ventilation and cooling of the unit.
•This product should be located away from heat sources such as radiators, heat registers, or other products that produce heat.
•This product may be equipped with a polarized plug (one blade wider than the other). This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the safety purpose of this plug.
•Protect the power cord from being pinched or abraded.
•This product should be serviced by qualified service personnel when: the power supply cord or the plug has been damaged; or objects have fallen, or liquid has been spilled onto the product; or the product has been exposed to rain; or the product does not appear to operate normally or exhibits a
marked change in performance; or the product has been dropped, or the enclosure damaged.
•Only use a cart or stand with this product that is recommended by this product’s manufacturer.
•The power supply cord of this product should be unplugged from the outlet when left unused for a long period of time, or during electrical storms.
•Do not drip nor splash liquids, nor place liquid filled containers on the unit.
•CAUTION: No user serviceable parts inside, refer servicing to qualified personnel only.
•Fender® amplifiers and loudspeaker systems are capable of producing very high sound pressure levels which may cause temporary or permanent hearing damage. Use care when setting and adjusting volume levels during use.
FCC COMPLIANCE NOTICE
This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide a reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instructions, may cause harmful interference to radio communications and there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that of the receiver. Consult the dealer or an experienced radio/TV technician if help is needed.
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CALIFORNIA USA
Trademarks:
Fender®,
Copyright © 2006 FMIC. All rights reserved.
P/N 683ICT011 Rev ?
FENDER
.COM
