JVC HR-S7600U manual Select CA Playback SET Mode, Return to Normal Screen, Press CH 5 or Time

SELECT WITH (5,°) AND (OK)

PRESS (MENU) TO END

CH

− +

OK

MENU

SKIP SEARCH

1

3 OK

MENU

TIME SCAN

"CA(Commercial Advance) RECORD" and "CA PLAYBACK" are set to " OFF " at the factory. To set Commercial Advance perform the following steps to set "CA RECORD" to "ON" and "CA PLAYBACK" to "AUTO".

ACCESS MAIN MENU SCREEN

1	Press MENU.
2	ACCESS FUNCTION SET SCREEN
	Press CH 5° or TIME SCAN %Þ to move the highlight
	bar (arrow) to "FUNCTION SET", then press OK or TIME
	SCAN #.

SELECT CA RECORD SET MODE
Press CH 5° or TIME	FUNCTION
SCAN %Þ to move the
	=VIDEO CALIBRATION	ON
3 highlight bar (arrow) to	AUTO TIMER	OFF
	PICTURE CONTROL	AUTO
"CA RECORD", then press	SUPERIMPOSE	ON
OK or TIME SCAN #to set
	AUTO SP=EP TIMER	OFF
to "ON".	DIGITAL R3	ON
	NEXT PAGE
	SELECT WITH (5,°) AND (OK)
	PRESS (MENU) TO END
	PREVIOUS PAGE
	FRONT AUX INPUT	VIDEO
	REAR AUX INPUT	VIDEO
	=CA RECORD	ON
	CA PLAYBACK	OFF
	SELECT WITH (5,°) AND (OK)
	PRESS (MENU) TO END

EN33

SELECT CA PLAYBACK SET MODE

Press CH 5° or TIME	PREVIOUS PAGE
SCAN %Þ to move the	FRONT AUX INPUT	VIDEO
4 highlight bar (arrow) to	REAR AUX INPUT	VIDEO
	CA RECORD	ON
"CA PLAYBACK", then
	=CA PLAYBACK	AUTO
press OK or TIME SCAN #
to set to "AUTO".

● Select "AUTO" to automatically skip over

CA recorded commercials during playback.

●Select "MANUAL" to manually skip over CA recorded commercials by pressing SKIP SEARCH.

●Select "OFF" to disable CA Playback of CA recorded commercials.

●Press SKIP SEARCH during playback, with "MANUAL" (or "AUTO") selected, to fast-motion the tape to the end of the next commercial group or to the end of the recording, and then resume normal playback.

NOTE:

If you press SKIP SEARCH during a commercial, the VCR may not resume normal playback at the end of the group of commercial. If this occurs press PLAY or STOP to resume normal playback.

RETURN TO NORMAL SCREEN

5 Press MENU.

NOTES:

●If you set "CA RECORD" to "ON" while recording is in progress, the VCR will mark an index code at that location.

●You cannot change the "CA PLAYBACK" setting during Commercial Advance fast-motion playback.

●While recording is in progress with "CA RECORD" set to "ON", you cannot mark an index code manually, nor change the recording tape speed.

●During playback with "CA PLAYBACK" set to "OFF", pressing SKIP SEARCH starts fast-motion playback for 30 seconds on the counter (☞ pg. 35).

●If there is a power outage while recording is in progress with "CA RECORD" set to "ON", commercials that are recorded after the power is restored may not be detected properly.

●If you want to stop recording when "CA RECORD" is set to "ON", be sure to press STOP. If you press POWER or TIMER to stop recording, that may affect detection accuracy for commercials recorded afterwards.

U.S. Pat. No. 5,333,091

HR-S7600U-EN24-44 33 99.4.28, 2:03 PM