ENGLISH

When an FM stereo broadcast is hard to receive:

Set the FM reception mode to “Mono On.”

1Press M (MODE) while listening to an FM stereo broadcast.

“Mode” appears on the display. The next-step-operation buttons start flashing.

2Press number button 1 to select “Mono On” while “Mode” is still on the display.

Each time you press the button, “Mono On” or “Mono Off” appears alternately.

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)

•Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).

1 Select the FM/AM tuner.

Each time you press and hold the button, the FM/AM tuner and the DAB tuner are alternately selected.

After about 5 seconds

The display returns to the source indication screen.

MONO indicator appears.

The sound you hear becomes monaural but the reception will be improved.

2 Select the FM band (FM1 – 3) you want to store FM stations into.

Each time you press the button,

the band changes as follows:

FM1 FM2 FM3 AM

3 Start automatic preset.

1Press M (MODE).

“Mode” appears on the display. The next-step-operation buttons start flashing.

2Press and hold number button 5 while “Mode” is still on the display.

“SSM” appears, then disappears when automatic preset is over.

12