ENGLISH
3 Start searching for an ensemble.
To search for ensembles of higher frequency.
To search for ensembles of lower frequency.
When an ensemble is received, searching stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4 Select a service (either primary or secondary) you want to listen to.
To select the next service. (If a primary service has some secondary services, they are selected before the next primary service is selected.)
To select the previous service (either primary or secondary).
To tune in to a particular ensemble without searching1Press and hold FM/AM DAB repeatedly to select the DAB tuner as the source.
2Press FM/AM DAB repeatedly to select the DAB band (DAB1, DAB2, or DAB3).
3Press and hold ¢
or 4
until “Manual Search” starts flashing on the display.
4Press ¢
or 4
repeatedly until the ensemble you want is reached.
•If you hold down the button, the frequency keeps changing until you release the button.
5Press 5 (up) or ∞(down) to select a service (either primary or secondary) you want to listen to.
If this happens, especially when you are listening at a low volume level, you can reinforce the sounds to improve for your listening.
For this purpose, some service provides Dynamic Range Control signals together with their regular programme signals.
1Press M (MODE) while listening to a DAB service.
“Mode” appears on the display. The
2Press number button 1 repeatedly to activate the DRC function while “Mode” is still on the display.
Each time you press the button, the DRC function will be set as follows:
DRC 1 
DRC 2 
DRC 3
DRC Off 
As the number increases, the DRC effect level also increases.
After about 5 seconds
The DRC indicator appears
•The DRC indicator will be highlighted
(
) only when the unit received DRC signals from the tuned service.
To cancel the DRC effect, select “DRC Off.”
24