Local FM stations with the strongest signals are

4 Press and hold the number button

searched and stored automatically in the band

(in this example, 1) for more than

number you have selected (FM1, FM2, or FM3).

2 seconds.

These stations are preset in the number buttons

 

—No.1 (lowest frequency) to No.6 (highest

 

frequency).

 

When automatic preset is over, the station stored

 

in number button 1 will be automatically tuned in.

 

The display pattern automatically changes

Manual presetto the small animation display (see page 15).

You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually.

Ex.: Storing FM station of 92.5 MHz into the

preset number 1 of the FM1 band.

1

Select the FM/AM tuner.

After about

5 seconds

Each time you press and hold the button, the FM/AM tuner

and the DAB tuner are

ENGLISH

alternately selected.

Preset number appears.

2 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).

Each time you press the button,

the band changes as follows:

FM1 FM2 FM3 AM

3 Tune in to a station (in this example, of 92.5 MHz).

To tune in to stations of higher frequencies

To tune in to stations of lower frequencies

5 Repeat the above procedure to store other stations into other preset numbers.

Notes:

•A previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

13