To show the graphics on the display —Graphics

You can change the graphics shown on the display. These graphics appear if no operation is done for about 20 seconds (except for “ImageLink”).

•Int Demo: Display demonstration (animation) and playback source indication appears alternately (see page 8).

•All Demo: Display demonstration (animation) appears (see page 8).

•UserMovie: Your edited animation appears (see pages 50 and 51).

•UserSlide: Your edited still images appears in sequence (see pages 50 and 51).

•UserPict.: One of your edited still image appears (see pages 50 and 51).

•ImageLink: To show a still image while playing back an MP3/WMA tracks (see

 

page 33).

• Off:

Cancels all graphic display above.

Note:

You can select “UserMovie,” “UserSlide,” and “UserPict.” only after downloading the appropriate files in memory. (See page 46.)

To turn the source animation on the display on or off—KeyIn CFM

When changing the source, the display shows the source animation. You can turn on or off the source animation on the display.

•

On:

Turns on the source animation.

•

Off:

Cancels the source animation.

To select the scroll mode for disc information and the DAB text—Scroll

You can select the scroll mode for disc information and for the DAB radio text (DLS: Dynamic Label Segment).

•Once: While showing the disc information: scrolls the disc information only once. While showing the DAB text: scrolls

 

 

the detailed DAB text.

•

Auto:

While showing the disc information:

 

 

repeats the scroll (in 5-second

 

 

intervals).

 

 

While showing the DAB text: scrolls

 

 

the detailed DAB text.

•

Off:

While showing the disc information:

 

 

cancels scroll mode.

 

 

While showing the DAB text: shows

 

 

only headline if any.

Note:

Even if the scroll mode is set to “Off,” you can scroll the display by pressing D (DISP) for more than one second.

To adjust the display contrast level—Contrast

Adjust the display contrast (1 – 10) to make the display indications clear and legible.

To select the display illumination pattern

—LCD Type

You can select the display illumination patterns according to your preference.

• Auto:

Positive pattern will be selected

 

during the day time (depending on

 

the “Dimmer” setting); on the other

 

hand, negative pattern will be used

 

during the night time (depending on

 

the “Dimmer” setting).

•Positive: Positive (normal) pattern of the display.

•Negative: Negative pattern of the display.

To select the font on the display—Font Type

You can change the font types used on the

display. Select either “1” or “2” according to your preference.

ENGLISH

55