ENGLISH

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 12 and 13.

Selecting a preset station directly

1 Select the FM/AM tuner.

Each time you press and hold the button, the FM/AM tuner and the DAB tuner are alternately selected.

2 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

2 Select the band (FM1 – 3, AM).

Each time you press the button,

the band changes as follows:

FM1 FM2 FM3 AM

3 Press and hold 5(up) or ∞(down) until the preset station list for the current band (FM1, FM2, FM3, or AM) appears on the display.

The current station will be highlighted on the display.

FM1 FM2 FM3 AM

3 Select the number (1 – 6) for the preset station you want.

Selecting a preset station using the preset station list

If you forget what stations are stored in which preset numbers, you can check the preset station list, then select your desired station.

1 Select the FM/AM tuner.

Each time you press and hold the button, the FM/AM tuner and the DAB tuner are alternately selected.

Ex.: When you select the preset station number 1 of the FM1 band

Notes:

•You can show the other FM band preset station lists (FM1, FM2, or FM3) by pressing 5(up) or ∞ (down).

•If a preset station is an FM RDS station with PS (programme station) signal, PS name will be shown instead of the station frequency.

4 Select the number (1 – 6) for the preset station you want.

14