TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

 

Symptoms

Causes

Remedies

 

 

 

 

 

 

 

 

 

 

 

•

Sound cannot be heard

The volume level is set to the

Adjust it to the optimum level.

 

 

 

from the speakers.

minimum level.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and connections.

 

 

 

 

 

 

 

 

•

This unit does not work at

The built-in microcomputer

Press the reset button on the

 

 

all.

functions incorrectly due to

control panel. (Your preset

 

 

 

noise, etc.

adjustments will also be erased.)

General

 

 

 

(See page 2.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

“Panel Connect Error”

The control panel is not attach

Remove the control panel, wipe

 

 

appears on the display.

correctly and firmly.

the connectors, then attach it

 

 

 

 

again. (See page 61.)

 

 

 

 

 

 

 

 

 

 

 

•

When “Reset P00” to

There is something is blocking

Press the reset button on the

 

 

“Reset P44” appears on the

the control panel movement.

control panel. (See page 2.)

 

 

display.

 

If the reset button does not work,

 

 

 

 

check the installation. (Ex. you

 

 

 

 

have used a screws which are

 

 

 

 

longer than specified.)

 

 

 

 

 

 

 

 

 

 

•

SSM (Strong-station

Signals are too weak.

Store stations manually.

 

 

 

Sequential Memory)

 

 

 

 

 

 

 

 

automatic preset does not

 

 

 

 

 

 

Tuner

 

work.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

Static noise while listening

The aerial is not connected

Connect the aerial firmly.

 

 

to the radio.

firmly.

 

 

 

 

 

 

 

 

 

 

 

• Disc cannot be played back.

Disc is inserted upside down.

Insert the disc correctly.

 

 

 

 

 

 

 

 

 

•

CD-R/CD-RW cannot be

CD-R/CD-RW is not finalized.

• Insert a finalized CD-R/

 

 

played back.

 

CD-RW.

 

 

 

 

•

Tracks on the CD-R/

 

• Finalize the CD-R/CD-RW

 

 

CD-RW cannot be skipped.

 

with the component which

 

 

 

 

you used for recording.

 

 

 

 

 

 

 

•

Disc cannot be ejected.

Disc is locked.

Unlock the disc. (See page 38.)

 

 

 

 

 

 

 

 

 

Playback

 

display.)

 

 

 

 

 

 

• Disc cannot be recognised

The CD player may function

While holding

 

,

 

 

 

 

(“No Disc,” “Loading Error,” or

incorrectly.

press 0 (eject) for more than 2

 

 

“Eject Error” flashes on the

 

seconds to eject the disc.

 

 

 

 

 

 

 

 

 

Disc

•

Disc sound is sometimes

You are driving on rough roads.

Stop playback while driving on

 

interrupted.

 

rough roads.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc is scratched.

Change the disc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

 

 

 

connections.

 

 

 

 

 

 

 

 

 

 

•

“No Disc” flashes on the

No disc in the loading slot.

Insert a disc into the loading slot.

 

 

display.

 

 

 

 

 

 

 

 

Disc is inserted incorrectly.

Insert the disc correctly.

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGLISH

69