4. BASIC ADJUSTMENTS BEFORE USE (Be sure)
MONITOR ADJUSTMENT
AC- INPUT | SEE INSTRUCTION MANUAL |
| EXT REF |
| OUTPUT | ||
|
|
|
| VD | HD/VBS | VIDEO | Y/C |
|
|
|
|
|
| ||
|
| LENS |
| EXT TRIGGER |
|
|
|
|
| REMOTE | FLASH | WEN | FREEZE | MONITOR | RGB/COMPONENT |
|
|
|
|
| 1. |
|
|
| 2. |
| 3. |
|
|
|
| To Monitor |
|
|
|
|
|
|
| ||
|
|
|
|
|
| CAMERA CONTROL UNIT | ||
| LOCK | MENU | ITEM+ | DATA+ |
| FILES | FREEZE | |
| 1 | 2 | 3 | 4 | ||||
| ON |
|
|
| ||||
|
|
|
|
|
|
|
| |
|
|
| BARS |
|
|
|
| |
1 2 3 4 | RESET | SET | ITEM- | DATA- | SELECT |
|
| MEMORY |
ON | OFF |
|
|
|
|
|
| POWER |
TO CAMERA | WHITE PAINT |
|
| VIDEO LEVEL | ||||
SET | FULL AUTO | LEVEL |
|
| ON |
RB
OFF
PAINT
SMPTE type color bars [U Ver.]
White | Yellow | Cyan | Green | Magenta |
| Red |
| Blue |
1 | 2 | 3 | 4 | 5 |
| 6 |
| 7 |
Blue | Black | Magenta | Black | Cyan |
| Black |
| White |
8 | 9 | 10 | 11 | 12 |
| 13 |
| 14 |
Blue | White | Black |
|
|
|
|
| |
15 |
| 16 | 17 |
| 18 | 19 | 20 | 21 |
EBU type color bars [E Ver.]
White Yellow Cyan Green Magenta Red | Blue Black |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Perform the adjustments for color, contrast and luminance by displaying the color bar signal built into the
1. Connect a color video monitor to the VIDEO OUPUT termi- nal of the
2.
3. Press the “ITEM+” button to output the color bar signal (the color bar conforms to the SMPTE [U Ver.] or EBU [E Ver.] )
4. While displaying the color bar, set the BLUE CHECK of the monitor to “ON”.
The screen becomes blue only mode and color bar becomes blue stripe pattern.
5. [U Ver.]
Turn the CHROMA adjustment volume on the monitor to adjust the color bar so that the brightness of 1 and 8 , and 7 and 14 become the same.
[E Ver.]
Turn the CHROMA adjustment volume on the monitor to adjust the color bar so that the brightness of 1 and 7 become the same.
6. [U Ver.]
While the BLUE CHECK is ON, turn the PHASE adjust- ment volume of the monitor to adjust the color bar, so that the brightness of 3 and 10 , and 5 and 12 become the same.
[E Ver.]
While the BLUE CHECK is ON, turn the PHASE adjust- ment volume of the monitor to adjust the color bar, so that
the brightness of 3 and | 5 | become the same. |
7. [U Ver.] | 1 and 8 , and 7 and 14 change | |
In case the brightness of | ||
when carrying out the PHASE adjustment, start the proce- | ||
dure again from step 4 . |
|
|
[E Ver.] |
|
|
In case the brightness of | 1 | and 7 change when carrying |
out the PHASE adjustment, start the procedure again from step 4 .
8. Set the BLUE CHECK of the monitor to OFF to return to the normal screen (to display all colors, R, G and B).
9. [U Ver.] only
Adjust the BRIGHT adjustment volume of the monitor, so that 18 and 19 disappear and 20 becomes visible.
10.When the adjustment is completed, press the “ITEM+” but- ton again to return to the normal screen.
12Revised in August 1998
