5. OPERATION (Cont’d)
MANUAL OPERATION
WHITE PAINT
CAMERA CONTROL UNIT KY-F58
| LOCK MENU | ITEM+ | DATA+ |
| FILES | FREEZE | |
| 1 | 2 | 3 | 4 | |||
| ON |
|
| ||||
|
|
|
|
|
|
| |
|
| BARS |
|
|
|
| |
1 2 3 4 RESET | SET | ITEM- | DATA- | SELECT |
|
| MEMORY |
ON | OFF |
|
|
|
|
| POWER |
TO CAMERA | WHITE PAINT | VIDEO LEVEL |
SET | FULL AUTO | LEVEL |
|
| ON |
RB
OFF
PAINT
PAINT (R) PAINT (B)
The red and blue colors of the video signal from each output can be adjusted with the two adjust knobs PAINT(R) and PAINT (B). The amount of variation possible with the volume controls may be different in the WHITE PAINT mode and the MANUAL WHITE mode.
White Paint
When the item for the WHITE BAL on the WHITE BALANCE screen is set to AUTO, the red and blue colors should also be finely adjusted against the white balance which has been set in accordance with the WHITE BALANCE ADJUSTMENT on page 13.
•Turning the PAINT (R) adjust knob to the right will slightly in- crease the red and turning it to the left will slightly decrease it.
•Turning the PAINT (B) adjust knob to the right will slightly in- crease the blue and turning it to the left will slightly decrease it.
VIDEO LEVEL
CAMERA CONTROL UNIT
| LOCK MENU | ITEM+ | DATA+ |
| FILES | FREEZE | |
| 1 | 2 | 3 | 4 | |||
| ON |
|
| ||||
|
|
|
|
|
|
| |
|
| BARS |
|
|
|
| |
1 2 3 4 RESET | SET | ITEM- | DATA- | SELECT |
|
| MEMORY |
ON | OFF |
|
|
|
|
| POWER |
TO CAMERA | WHITE PAINT | VIDEO LEVEL |
SET | FULL AUTO | LEVEL |
|
| ON |
RB
OFF
PAINT
FULL AUTO LEVEL
Full | Lens | Iris | Other | Volume | |
Auto | Type | Control | conditions | Operation | |
|
|
|
|
| |
ON | – | – | – | Convergence | |
Adjustment Level | |||||
|
|
|
| ||
|
|
| ALC,ALC + EEI,EEI | Convergence | |
| MANUAL | – |
| Adjustment Level | |
OFF | Except for the | Not functional | |||
|
| ||||
|
| above | |||
|
|
| |||
|
| AUTO | – | Convergence | |
|
| Adjustment Level | |||
| AUTO |
|
| ||
| MANUAL | – | Manual Iris | ||
|
| ||||
|
|
| Adjustment | ||
|
|
|
|
Manual White
When the item for the WHITE BAL on the WHITE BALANCE screen is set to MANUAL, the red and blue color levels can be adjusted.
•Turning the PAINT (R) adjust knob to the right will increase the red and turning it to the left will decrease it.
Turning the PAINT (B) adjust knob to the right will increase the blue and turning it to the left will decrease it.
<Variable Range>
•When the COLOR TEMP is set to 3200K, the color tempera- ture can be changed from 2000K up to 5600K.
•When the COLOR TEMP is set to 5200K, the color tempera- ture can be changed from 4500K up to 15000K.
The video signal level at each OUTPUT can be varied with the LEVEL adjust knob. With regard to the amount of the video level variability available at the FULL AUTO button by using the LEVEL adjust knob, refer to the chart on the left.
Convergence Level Adjustment.
The convergence level which is a standard value for the Auto Iris can be finely adjusted.
•Turning the LEVEL adjust knob to the right opens the lens iris approximately three diaphragms at the maximum.
•Turning the LEVEL adjust knob to the left closes the lens iris approximately three diaphragms at the maximum.
Manual Iris Adjustment
The lens iris can be adjusted from OPEN to CLOSE.
•Turning the LEVEL adjust knob to the right opens the lens iris to the IRIS OPEN.
•Turning the LEVEL adjust knob to the left closes the lens iris to the IRIS CLOSE.
Non Operational
The video level can not be varied by turning the LEVEL adjust knob.
FREEZE
|
|
|
|
|
|
| FREEZE |
|
|
|
|
| CAMERA CONTROL UNIT | ||
| LOCK MENU | ITEM+ | DATA+ |
| FILES | FREEZE | |
| 1 | 2 | 3 | 4 | |||
| ON |
|
| ||||
|
|
|
|
|
|
| |
|
| BARS |
|
|
|
| |
1 2 3 4 RESET | SET | ITEM- | DATA- | SELECT |
|
| MEMORY |
ON | OFF |
|
|
|
|
| POWER |
TO CAMERA | WHITE PAINT | VIDEO LEVEL |
SET | FULL AUTO | LEVEL |
|
| ON |
RB
OFF
PAINT
When the FREEZE button is pressed, the display LED lights and each output signal is frozen. The LED lights during FREEZE mode.
Refer to the “FREEZE SCREEN” on page 21. Refer to the “FLASH Function” on page 28.
17
