14
2500 K
2800K
Red-ish
Color temperature
White-ish Blue-ish
7000 K6000 K 5000 K4000 K3000 K
Halogen
lamp
Incandescent
lamp
(Sun light)
Fluorescent
lamp
The range of FULL TIME AUTO WHITE function
Bright cloudy sky
– – – WHITE BALANCE – – –
COLOR TEMP
WHITE BAL
SHADING MODE
LEVEL<R>
LEVEL<G>
LEVEL<B>
: 3200K
: FAW
: OFF
:
:
:
8000 K 15000 K
WHITE BALANCE SCREEN
4. BASIC ADJUSTMENT BEFORE USE (Cont’d)
WHITE SHADING ADJUSTMENT
Green or magenta color appears on the top or bottom of the screen, this is because the white balance is adjusted at the center of the
screen but not at the top or bottom of the screen. This is caused by the characteristics of a lens and to compensate it is called white
shading compensation.
<How To Set >
After performing the WHITE BALANCE ADJUSTMENT proce-
dure
1.
to
10.
, carry out the following settings.
1.
Display the MENU screen by pressing the MENU button.
2.
Move a cursor to “2. WHITE BALANCE” with the ITEM but-
ton, then press the SET button to display the “WHITE BAL-
ANCE” screen.
3.
Set the SHADING MODE item to the “MANUAL” by pressing
the DATA+ button or the DATA– button.
4.Change the items on the LEVEL<R>, LEVEL<G> and
LEVEL<B> with the DATA+ and DATA- button while watching
the monitor screen.
When the number increases, the color on the bottom of the
screen is suppressed and the color on the top is emphasized.
5.When the settings for all channels (R channel, G channel, B
channel) are completed, carry out the white balance adjust-
ment again.
6.To register the setting values of the white shading to the FILE,
return to the normal screen then press the MEMORY button
for 2 seconds or more.
– – – WHITE BALANCE – – –
COLOR TEMP
WHITE BAL
SHADING MODE
LEVEL<R>
LEVEL<G>
LEVEL<B>
: 3200K
: AUTO
: MANUAL
: NORMAL
: NORMAL
: NORMAL
CAMERA CONTROL UNIT KY-F58
FREEZEFILES
WHITE PAINT
POWER
VIDEO LEVELTO CAMERA
4321
MEMORYSELECT
FULL AUTO
RB
LEVEL ON
OFF
PAINT
SET
LOCK MENU
SET ITEM-
ITEM+ DATA+
DATA-
RESET
BARS
ON
4321
ON
OFF
WHITE BALANCE SCREEN
1. 6.2. 3.4.FULL TIME AUTO-WHITE FUNCTION
With the FULL TIME AUTO-WHITE ADJUSTMENT function, even if the lighting condition is changed, this function will trail it automati-
cally in order to adjust the white balance to the optimum condition.
<How To Set >
1.
Display the MENU screen by pressing the MENU button.
2.
Move a cursor to “2. WHITE BALANCE” with the ITEM but-
ton, then press the SET button to display the “WHITE BAL-
ANCE” screen.
3.
Set the item WHITE BAL to the FAW with the DATA+ and
DATA- button.
Note:
If the whole screen consists of one color, an object has many
colors or the color temperature of the light source varies, the
appropriate full time auto white balance may not be adjusted.
In this case, carry out the “WHITE BALANCE ADJUSTMENT”
on page 13.
CAMERA CONTROL UNIT KY-F58
FREEZEFILES
WHITE PAINT
POWER
VIDEO LEVELTO CAMERA
4321
MEMORYSELECT
FULL AUTO
RB
LEVEL ON
OFF
PAINT
SET
LOCK MENU
SET ITEM-
ITEM+ DATA+
DATA-
RESET
BARS
ON
4321
ON
OFF