
5. OPERATION
FILE SETTING
There are four scene files to be set by dip switch depending on the operating conditions.
Scene File A including four sub files are all set to the standard shipment setting values. Change the settings according to the requirements. Scene File B, C and D should be set to required file settings before use such as Slit inspection, Microscope 1 , Microscope 2 , etc.
Note:
Before carry out operations below, make sure the LOCK switch is turned OFF.
Scene File Setting
Select the “Scene File” with the dip switch 1 and 2 according to the purposes.
DIP switch | SELECT button |
Scene File
A
|
|
|
|
| Dip switch setting | Example for use | ||
| 1 2 3 4 | 1. OFF | Standard | |||||
ON | 2. OFF | |||||||
|
|
|
|
| setting | |||
|
|
|
|
| 3, 4. Do not switch over | |||
|
|
|
|
| ||||
|
|
|
|
|
|
| LOCK | MENU | ITEM+ | DATA+ |
|
| ON |
|
|
|
|
|
|
| BARS | |
1 2 3 4 | RESET |
| SET | ITEM- | DATA- |
ON |
| OFF |
|
|
|
TO CAMERA | WHITE PAINT |
SET | |
R | B |
CAMERA CONTROL UNIT KY-F58
| FILES | FREEZE | |
1 | 2 | 3 | 4 |
SELECT |
| MEMORY | |
|
|
| POWER |
|
| VIDEO LEVEL | |
| FULL AUTO | LEVEL | |
|
|
| ON |
|
|
| OFF |
B
C
D
| 1 2 3 4 | 1. ON | Slit | |||||
ON | 2. OFF | |||||||
|
|
|
|
| ||||
|
|
|
|
| Inspection | |||
|
|
|
|
| 3, 4. Do not switch over | |||
|
|
|
|
|
|
| ||
| 1 2 3 4 | 1. OFF |
| |||||
ON | 2. ON | Microscope 1 | ||||||
|
|
|
|
| ||||
|
|
|
|
| 3, 4. Do not switch over |
| ||
|
|
|
|
|
|
| ||
| 1 2 3 4 | 1. ON |
| |||||
ON | 2. ON | Microscope 2 | ||||||
|
|
|
|
| ||||
|
|
|
|
| 3, 4. Do not switch over |
| ||
|
|
|
|
|
|
|
PAINT
Note:
Switch off the power when switching the Scene File over. If it is carried out while the power is ON, it will not be changed.
Changing setting | MEMORY button |
values |
|
|
|
|
|
|
| CAMERA CONTROL UNIT | ||
|
| LOCK | MENU | ITEM+ | DATA+ |
| FILES | FREEZE | |
|
| 1 | 2 | 3 | 4 | ||||
|
| ON |
|
|
| ||||
|
|
|
|
|
|
|
|
| |
|
|
|
| BARS |
|
|
|
| |
1 2 3 4 | RESET |
| SET | ITEM- | DATA- | SELECT |
|
| MEMORY |
ON |
| OFF |
|
|
|
|
|
| POWER |
TO CAMERA |
| WHITE PAINT |
|
| VIDEO LEVEL |
SET | FULL AUTO | LEVEL |
|
| ON |
RB
OFF
PAINT
FILE Setting
Each Scene File has four of sub files (FILE) to be set.
Each time the SELECT button is pressed, it is switched in the order of
FILE1 FILE2
FILE3
FILE4.
It takes 1 second to switch over the FILE. LED blinks rapidly during the FILE switching operation.
Note:
Do not perform other operations during the LED blinking, it may cause the
The FILE setting is completed when the LED stops blinking, and lights.
Changing setting values
The setting value is changed for each file.
Refer to the “6. SETTINGS ON THE MENU SCREEN” on page 18.
Registration to the FILE
Setting values can be registered to each FILE.
Press the MEMORY button for 2 sec. or more for registration. The setting value is registered to the FILE which LED lights. It takes approx. 2 sec. for registration. During the registration, the LED blinks slowly.
The FILE registration is completed when the LED stops blink- ing, and lights.
Note:
•To register a value which has been changed on the MENU screen or with a volume level knob, make sure to register any changes in the selected file. If the power is turned off without registering the changes, they will be automatically erased.
•Do not perform other operations during the LED blinking, it may cause the
15