English
Receiving Radio Broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular station.
IMPORTANT:
When using the remote control, check to see if its
remote control mode selector is set to the correct AUDIO/
Using Preset Tuning
Once a station is assigned to a channel number, the station can be
position:
TV/VCR
quickly tuned. You can preset up to 30 FM and 15 AM stations.
To operate this receiver, set it to “AUDIO/TV/
CATV/DBS
VCR” (except when selecting the DBS tuner as the source).
Tuning in Stations Manually
Check the AM tuner internal spacing (9 kHz or 10 kHz) for your area. (See page 16.)
On the front panel:
1. Turn SOURCE SELECTOR to | SOURCE SELECTOR | |||||
| ||||||
| select the band (FM or AM). |
| ||||
| The last received station of the selected band |
| ||||
| is tuned in. |
| ||||
|
|
|
|
|
|
|
|
|
|
|
| VOLUME |
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
| 100 | 1k | 10k |
| ||
To store the preset stations
Before you start, remember...
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel ONLY:
1.Tune in the station you want to preset (see “Tuning in Stations Manually”).
•If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the FM Reception Mode” on page 18.
VOLUME
100 1k 10k
TUNER/SEA MEMORY
2.Press FM/AM TUNING.
3.Turn MULTI JOG until you find the frequency you want.
•Turning it clockwise increases the frequency.
•Turning it counterclockwise decreases the frequency.
•When you turn MULTI JOG quickly, the frequency keeps changing until a station is tuned in.
FM/AM TUNING
MULTI JOG
2. Press TUNER/SEA MEMORY.
CH– 
VOLUME
100 1k 10k
MULTI JOG
3.Turn MULTI JOG to select a channel number while the channel number position is flashing.
From the remote control:
1.Press FM/AM to select the band.
•Each time you press the button, the band alternates between FM and AM.
2.Press TUNING UP or TUNING DOWN repeatedly until you find the frequency you want.
•When you hold the button, the frequency keeps changing until a station is tuned in.
Note:
FM/AM
FF/ 
TUNING UP
/REW
DOWN TUNING
Note:
You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure that they are activated for the tuner, not for the CD and others. (See page 42.)
4. Press TUNER/SEA MEMORY | TUNER/SEA MEMORY |
again while the selected channel |
|
number is flashing on the display. |
|
The selected channel number stops flashing.
The station is assigned to the selected channel number.
CH–
When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.
When an FM stereo program is received, the STEREO indicator also lights up.
VOLUME
100 1k 10k
5.Repeat steps 1 to 4 until you store all the stations you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored one.
17
