English
IMPORTANT:
When using the remote control, check to see if its
remote control mode selector is set to the correct AUDIO/
3. Press EFFECT to select an effect | EFFECT |
level you want. | 7/P |
• Each time you press the button, the effect |
position:
TV/VCR
level changes as follows: |
To operate this receiver, set it to “AUDIO/TV/
CATV/DBS
VCR” (except when selecting the DBS tuner as the source).
Adjusting the 3D-PHONIC Modes
Once you have adjusted the
Before you start, remember...
•Make sure that you have set the speaker information correctly (see page 14).
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel:
DSP MODE
1. Press DSP MODE repeatedly until “3D ACTION (or 3D DIGITAL)” or “3D THEATER” appears on the display.
The
DSP EFFECT 1 
DSP EFFECT 2 
DSP EFFECT 3
DSP EFFECT 5 | DSP EFFECT 4 |
As the number increases, the selected
Adjusting the DAP Modes
Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.
Before you start, remember...
•Make sure that you have set the speaker information correctly (see page 14).
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
•You cannot adjust the rear speaker output level when you have set “REAR SPK” to “NONE.” See page 14.
•When the DAP mode is used with the SEA mode (see page 19), sounds may be distorted. If this happens, turn off the SEA mode.
On the front panel:
2.Adjust the effect level.
1)Press BALANCE/SURROUND ADJUST repeatedly until “DSP EFFECT” appears on the display. The display changes to show the current setting.
2)Turn MULTI JOG to select the effect level.
•As you turn it, the effect level changes as follows:
BALANCE/SURROUND
ADJUST
MULTI JOG
1. Press DSP MODE repeatedly until | DSP MODE |
| |
the DAP mode — LIVE CLUB, |
|
DANCE CLUB, HALL, or |
|
PAVILION — appears on the |
|
display. |
|
The DSP and the selected DAP mode indicators also light up on the display.
•When you have set “REAR SPK” to “NONE,” the 3D- PHONIC indicator also lights up.
DSP EFFECT 1
DSP EFFECT 2 
DSP EFFECT 3 
DSP EFFECT 5 | DSP EFFECT 4 |
|
As the number increases, the selected | ||
becomes stronger. |
|
|
From the remote control: |
|
|
1. Press SURROUND MODE |
| SURROUND |
repeatedly until “3D ACTION (or | MODE | |
|
| |
3D DIGITAL)” or “3D THEATER” appears on the display.
The
SOUND
2. Press SOUND.
The 10 keys are activated for sound adjustments.
2.Adjust the speaker output levels.
1)Press BALANCE/SURROUND ADJUST repeatedly until one of the indications appears on the display. “REAR L LEVEL”:
To adjust the left rear speaker level. “REAR R LEVEL”:
To adjust the right rear speaker level.
2)Turn MULTI JOG to adjust the selected speaker output level (from
3)Repeat 1) and 2) to adjust the other speaker output level.
BALANCE/SURROUND
ADJUST
MULTI JOG
23
