JVC LVT0178-001A, RX-889PGD Assigning Names to Preset Stations, Selecting the FM Reception Mode

To tune in a preset station

Note:

English

On the front panel:

1. Turn SOURCE SELECTOR to select the band (FM or AM).

The last received station of the selected band is tuned in.

2.Press TUNER PRESET.

3.Turn MULTI JOG until you find the channel you want.

•Turning it clockwise increases the channel numbers.

•Turning it counterclockwise decreases the channel numbers.

SOURCE SELECTOR

TUNER PRESET

MULTI JOG

When using the FM MODE/MUTING button on the remote control, be sure that the 10 keys are activated for tuner, not for the CD and others. (See page 42.)

Assigning Names to Preset Stations

You can assign a name of up to four characters to each preset station. When a preset station is tuned in, its assigned name will appear on the display.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You can use the following characters: Space, A – Z, and 0 – 9.

From the remote control:

1.Press FM/AM.

•Each time you press the button, the band alternates between FM and AM.

2.Press the 10 keys to select a preset channel number.

FM/AM

CNTR TONE CNTR

1 2 3

MENU

TESTREAR-L

On the front panel ONLY:

1. Tune in a preset station.

See the left.

2. Press TUNER/SEA MEMORY. TUNER/SEA MEMORY

The preset channel number starts flashing for about 10 seconds.

• For channel number 5, press 5.	4	5		6
			ENTER
• For channel number 15, press +10 then 5.	EFFECT		REAR-R
	7/P	8		9
• For channel number 20, press +10 then 10. SEA MODE			SUBWOOFER
• For channel number 30, press +10, +10,	10	0		+10
then 10.	RETURN	FM MODE/MUTING		100+

Note:

When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 42.)

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy

You can change the FM reception mode while receiving an FM broadcast.

• You can store the FM reception mode for each preset station.

Press FM MODE on the front panel or FM MODE/MUTING on the remote control.

•Each time you press the button, the FM reception mode alternates between “AUTO” and “MONO.”

FM MODE

SUBWOOFER

	0
	FM MODE/MUTING
On the front panel	On the remote control

AUTO: When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The MUTE AUTO indicator lights up on the display.

MONO: Reception will be improved although you will lose the stereo effect. In this mode, you will hear noise while tuning into the stations. The MUTE AUTO indicator goes off on the display.

CH–

VOLUME

•If you turn MULTI JOG while the preset channel number is flashing, you can change the preset channel number.

3.	Press TUNER PRESET, while the	TUNER PRESET
	preset channel number is flashing.
	The first character position starts flashing.
	CH–
		VOLUME
4.	Turn MULTI JOG to select the	MULTI JOG
	first character, while the first
	character position is flashing.
	CH–
5.	Press TUNER PRESET, while a	TUNER PRESET
	character you want is flashing.

The next character position starts flashing.

CH–

VOLUME

6.Repeat steps 4 and 5 to enter up to four characters.

7. Press TUNER/SEA MEMORY	TUNER/SEA MEMORY
while the last selected character is
flashing after you have assigned a
name.

To erase the input characters

Insert spaces using the same procedure described above.

18