JVC MP-XP5230GB, MP-XP7230GB warranty Ssid, Power Save Mode, Transmit Rate

EN 73

2Settings

Perform the wireless LAN communication settings.

This utility can retain multiple sets of setting information, and these sets can be selected for use. The settings are each managed by a [Profile]. When new settings are to be added, input the profile name of your choice, and then proceed with the settings.

[SSID]

Perform the ESS-ID setting for the network name. The wireless LAN group can be created by setting the ESS-ID. When it has been set, communication is possible only with the connection destination for which the same ID has been set.

[Mode]

Select either access point (infrastructure mode) or peer-to-peer (AdHoc mode) as the network type to be used.

For details on each of these network types, refer to the unit’s instruction manual (page 78).

Notes

When constructing a peer-to-peer network, select the channel number to be used using [AdHoc Channel].

[Power Save Mode]

Select On, Off or Auto as the power-saving mode setting.

[Transmit Rate]

1Mb:	The transmission rate is fixed at 1 Mbps.
2Mb:	The transmission rate is fixed at 2 Mbps.

Auto 1 or 2Mb: The transmission rate is automatically selected from 1 Mbps or 2 Mbps.

5.5Mb:	The transmission rate is fixed at 5.5 Mbps.
11Mb:	The transmission rate is fixed at 11 Mbps.
All auto:	The transmission rate is automatically selected.

When [OK] or [Apply] is clicked, the settings are saved or changed.