JVC MP-XP5230GB, MP-XP7230GB warranty Power-saving mode, Tips, AC power, on battery

EN 77

Power-saving mode

In compliance with the operation regulations of the International Energy Star Program, this unit enters the power-saving mode when no operation is performed for a certain period.

On the [Power Schemes] tab in the “Power Option Properties” screen (page 76), you can specify the time that must expire before the unit enters the power-saving mode. The table below shows the factory settings.

		Operating on	Operating		Status
		AC power	on battery
1	Turn off monitor:	15 minutes	5 minutes	The LCD screen turns off.
				The	(Stand By) lamp is still lit in green.
				The hard disk power is turned off with
2	Turn off hard disks:	30 minutes	5 minutes	the LCD screen kept off. The
				(Stand By) lamp is still lit in green.
3	System standby:	20 minutes	5 minutes	The LCD screen is turned off.
				The	(Stand By) lamp flashes in green.
4	System hibernates:	3 hours	2 hours	The PC stores the current system status
				on the hard disk. The		(Stand By) lamp
				will go out.

Tips

To exit status 1 or 2 , move the stick or press any key on the keyboard.

To exit status 3 , press the Power key or any key on the keyboard.

To exit status 4 , press the Power key.

Important

•In statuses 1 through 3, Windows is still running. Note that the current condition is lost if the PC is turned off by pressing the Power key for more than 4 seconds.