Manuals / JVC / Computer Equipment / Laptop

JVC MP-XP7230GB, MP-XP5230GB 78EN, Hardware, System in standby status, System in halt status

Models: MP-XP5230GB MP-XP7230GB

1 126

Download 126 pages 7.25 Kb

Page 78

Image 78

78EN

HARDWARE

•System in standby status

The built-in battery discharges whilst the PC is in system standby status. As a result, any unsaved data may be lost or the system may not start up. Be sure to turn off the PC when it is not used for a long time.

Under fully charged condition, the unit can maintain the system standby status for the following periods.

1About 20 hours with the built-in battery pack alone

2About 55 hours with the built-in and standard battery packs

•System in halt status

Continued operation on the PC displaying a battery-low warning causes the result as follows:

1 When the halt status is enabled

The PC turns off while maintaining the current data.

2When the halt status is disabled

The PC does not save the current data, which will be lost.

We recommend that you enable the halt status setting. This function is enabled at the factory.

Page 78

Image 78

JVC MP-XP7230GB, MP-XP5230GB warranty 78EN, Hardware, System in standby status, System in halt status

Contents

The operating instructions guide is provided with each item packed MP-XP7230GB/MP-XP5230GBMobile mini note PC LET0235-002ACAUTIONS SAFETY PRECAUTIONSCAUTIONS Dear CustomerSOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT CAUTIONSABOVE ALL Radio waves emitted from wireless LANs IMPORTANT SAFETY INSTRUCTIONSWhen using the wireless LAN Mobile mini note PC with Radio Local Area Network RLANBattery Packs CAUTIONSGeneral Battery Precautions 2. To prevent damage and prolong service lifeCHECKING INVENTORY 1. Copyright Ownership JVC Software License AgreementEND-USER LICENSE AGREEMENT 2. Grant of License7. Term 5. Limited Warranty6. Limitation of Liability 8. Termination1. Copyright Ownership END-USER LICENSE AGREEMENT5. Limited Warranty 2. Grant of License7. Term 10EN6. Limitation of Liability 8. Export ControlSETTING UP Table of contentsEN11 PC RECOVERY REPEATED PC SETUP12EN PARTS AND COMPONENT NAMESEN13 Wireless LAN antenna model MP-XP7230GB onlyWireless LAN antenna model MP-XP7230GB only Page SETTING UP 1. Unplug the jumper pin before recharging the battery pack SETTING UPSETTING UP 2. Mounting/Dismounting the Lithium Ion Battery Pack3. Open the display panel EN17SETTING UP 5. Make sure that the battery pack is fully charged18EN Á Make sure that the battery pack is fully rechargedEN19 TURN-ONTurning On/Off Key On Á Status indicatorsTURN-ON Initial Setup of Microsoft Windows20EN 3. Rename your computer and click Next7. Click Finish EN216. Enter the user name and click Next Tips1. Click start 22ENTurn-Off 2. Click Turn Off computerJVC ORIGINAL SOFTWARE AND SYSTEM APPLICATIONS 24EN Setup of JVC Original Software2. Read the License Agreement when displayed JVC ORIGINAL SOFTWAREDVC’s USB Drivers 1. Connect the DVC to the USB connector of your PC2. The hardware installation screen will appear 1 If The hardware JVC DV Camera Storage message appears2 If The hardware JVC Web Camera message appears 26ENJVC ORIGINAL SOFTWARE AND SYSTEM APPLICATIONS CautionsTo make the effect valid or invalid or to change the effect level 2. When the menu above appears, click on the desired optionCC Converter Explanation of menu optionsAbout the expansion effect modes 28ENJVC ORIGINAL SOFTWARE AND SYSTEM APPLICATIONS Á Harmonic expansion modeQuits the CC converter. The CC converter status you have set at this point is held. If you wish to restart the CC converter, you can start up the program from the Start menu Á About CC converterÁ Exit CautionsÁ Acrobat Reader 30ENSTANDARD APPLICATION Á Norton AntiVirusÁ Pinnacle Studio 8 SE only MP-XP7230GB The video editing software for the broadband ageCautions 5. The uninstaller will remove the selected application program To Set Up the Standard Applications AgainTo Uninstall a Standard Application 32ENNAVIGATE IN THE INTERNET WORLD TO CONNECT TO THE INTERNET Contracting with the Internet Service Provider34EN NAVIGATE IN THE INTERNET WORLDConnection of Telephone Line and Modem Setup Modem cable36EN 3. Seting up the modemNAVIGATE IN THE INTERNET WORLD Tips The Internet Connection Setup2. Click Next Tips38EN 4. Click Set up my connection manually option, and click Next5. Click Connect using a dial-up modem option, and click Next 3. Click Connect to the Internet option, and click NextThe Internet Account Information screen will appear 9. Click Finish. The setup for connection wizard is complete7. Enter the phone number, and click Next The Completing the New Connection Wizard screen will appear10. Click start and Control Panel in this order If you need to set up the DNS server address, follow steps 10 to40EN 11. Click Network and Internet Connection icon18. After you have entered the addresses, click OK 15. Click Networking16. Click Internet Protocol TCP/IP and click Properties 19. Respond with OK to the Dial-up Connection Properties1. Click start and click Internet at the upper left part of the Menu Connecting to the Internet42EN 2. Click ConnectDisconnection from the Internet NAVIGATE IN THE INTERNET WORLD Accessing a Web Page44EN 1. Directly enter the URL in the address bar1. Click start and click E-mail on the Menu Setting up E-Mail SoftwareE-MAILING TipsThe E-mail Server Name screen will appear 46ENNAVIGATE IN THE INTERNET WORLD The Internet Mail Logon screen will appear5. Enter the Account name and Password, and click Next 6. Click FinishThe Congratulations screen will appear NAVIGATE IN THE INTERNET WORLD 48ENSending and Receiving E-mails 1. Click start and click E-mail on the Menu3. Create a message 50EN 7. To check the received messages, click Inbox on the screenNAVIGATE IN THE INTERNET WORLD HARDWARE HARDWARE Using the Pointing Device52EN Á How to press the buttonsDouble-click DragScroll buttons 54EN Using Hot keysUsing the Numeric Keypad HARDWAREIf a key top has come off Á How to attach the Enter key, left Shift key or Space key topÁ How to attach any other key top 56EN Increasing the Optional Memory CapacityHARDWARE Adding or Removing a Memory Board 4. Add or remove a memory board Cautions1 Mounting a memory board 58ENHARDWARE Cautions1. Turn on your PC and start Windows 3. Click the Performance and Maintenance iconChecking the Additional Memory Board 2. Click start and select Control Panel1. Remove the dummy card Using the SD Memory Card Slot60EN 2. Insert an SD memory cardUsing an External Monitor Connecting an external monitor62EN HARDWAREConnecting to a network Setting for network connectionÁSetting the IP address manually HARDWARE ÁSetting a computer name or work group64EN TipsÁChecking the MAC address Tips66EN HARDWARENetwork connections using a wireless LAN MP-XP7230GB only General description of wireless LANTypes of wireless LAN networks 68EN Suggestions for using the wireless LANSetup procedure for the wireless LAN HARDWARE1 Start up the PC 2 Set the IP address to be used by the wireless LAN 70EN HARDWAREFor making the wireless network connection via an access point 4 Perform the wireless network settings 72ENHARDWARE Mode Power Save ModeSSID Transmit RateEncryption WEP security 74ENHARDWARE Create Keys Manually1 Press the How to shut down the wireless LAN functionsindicator above the F10 key will go off keys at the same time3. Click the Power Options icon Checking the battery level2. Click the Performance and Maintenance icon 4. Click the Power Meter tabon battery Power-saving modeAC power TipsSystem in standby status 78ENHARDWARE System in halt statusUnknown partition on hard disk Page PC RECOVERY REPEATED PC SETUP 2. Before starting Repeated Setup Setting Up Your PC Again1. What is the Recovery? 3. Repeated setup2. Read the License Agreement when displayed System Recovery Procedure3. Select the recovery method disk partitioning Tips84EN COMPUTER WIEDERHERSTELLUNG RECOVERYTROUBLESHOOTING Q. The power does not turn on TROUBLESHOOTINGPower 86ENAbout the message appearing if Windows is not exited normally Startup and Operation of WindowsThe screen has hung Terminating an application forcibly88EN TROUBLESHOOTINGTips Á When the Stand By lamp is lit DisplayQ. The PC is turned on but nothing appears on the screen Check if the display is configured as an external display deviceI cannot dial up Using the Internet90EN TROUBLESHOOTINGÁ When no connection operation occurs, check the destination setting Q. The PC dials but connection is not establishedA. Check the dialing setting TipsThe PC cannot send or receive e-mail messages 92ENThe PC makes a connection operation but connection is not established TROUBLESHOOTINGPage Q. Battery discharge faster than expected BatteryThe battery is not charged 94ENSD memory cards Concerning the USB portMiscellaneous I forgot the password96EN The PC is hotSetting procedure does not complete Á If you forget the BIOS passwordThe following passwords can be set on the BIOS Page APPENDIX 100EN APPENDIXList of Support Centres Trademark notice setup or usage Specification102EN APPENDIXWireless LAN specifications MP-XP7230GB only 104EN Options separately availableAPPENDIX Printed in Taiwan 01972003 VICTOR COMPANY OF JAPAN, LIMITED 0802HNY*IDASSHow you can use the built-in wireless LAN even more easily Supplementary instructions for using internal wireless LAN INSTRUCTIONS MP-PRX1GBUSB Port Replicator Thank you for purchasing the JVC MP-PRX1GB USB Port Replicator2 EN Dear CustomerCAUTIONS Features IntroductionUSB Port Replicator 4 ENAA-E5025GB AC Power Adapter Software CD-ROMHardware Installation LED Status Indicators6 EN Connection to Mobile Mini Note PCSERIAL Port USB 2.0 PortsPS/2 KEYBOARD and MOUSE Ports PARALLEL Port8 EN Software InstallationSelect “Install the software automatically Recommended” This wizard helps you install the device driver 10 EN Click Next to continue Setup will add the program icon to the Program FolderEN11 The PC-Linq icon will appear on the desktop12 EN Select “Install the software automatically Recommended”STEP Installation Verification EN1314 EN Appendix Installing the PC-Linq Software and Driver in an External PCEN15 STEP 4AClick Next to continue 16 ENSetup will add the program icon to the Program Folder The PC-Linq icon will appear on the desktop of the external PCSpecifications EN170203KHY*IDASS 2003 VICTOR COMPANY OF JAPAN, LIMITEDPrinted in Taiwan VICTOR COMPANY OF JAPAN, LIMITED1. Turn the PC’s power on 2. Connect ths unit to the PC Setting Up of USB Port Replicator MP-PRX1GBInstalling the device driver 4. Select Install from a list or specific location and click Next