JVC MX-DVA5 manual \

– 16 –
When playing back CDs and VCD without PBC
function, all loaded discs can be played continuously
When 3 discs are loaded on the disc trays, they are played in one of
the following sequences.
• When DVD1 is pressed : DVD1 ] DVD2 ] DVD3 (then stops)
• When DVD2 is pressed : DVD2 ] DVD3 ] DVD1 (then stops)
• When DVD3 is pressed : DVD3 ] DVD1 ] DVD2 (then stops)
– When only 2 discs are loaded, they are played in the same order,
but the disc tray without a disc is skipped.
– If you change discs during play (see below), the current play will
not stop until all discs you have changed are played.
If “PARENTAL LEVEL” appears on the TV screen
Parental Lock is in use. You cannot play back a DVD containing
violent scenes or those not suitable for your family members.
To play back such a disc, cancel the Parental Lock. (See page 30)
To exchange discs during playback of another disc
Press DISC CHANGE to change the disc and the
carrousel comes out.
To close the carrousel, press DISC CHANGE
or 0.
To skip to another disc in the carrousel
Press DISC SKIP on the remote control.
• Pressing DVD1, DVD2, or DVD3 will also skip
to the selected disc tray.
To stop play for a moment
Press DVD 6 (or STILL) while playing a
disc.
While pausing, the elapsed playing time stops
being counted and starts flashing. (If your TV
is turned on, “8 PAUSE” also appears on the
TV screen.)
• A still picture appears while playing a DVD or
VCD. You can advance the still picture frame by
frame by pressing the STILL on the remote
control repeatedly. (See page 22 or 27.)
To resume play, press DVD 6 again.
To go to another chapter or track
Press 4 or ¢ repeatedly before or
during playback.
•4:Goes back to the beginning of
the previous chapter or track.
•¢:Skips to the beginning of the
next or succeeding chapter or
track.
\
PRESET
PREV.
NEXT
DISC CHANGE
SELECT
/
To go to another chapter or track directly using the number
buttons
Pressing the number buttons before or
during play allows you to start playing the
chapter or track number you want.
• To select number 1 to 9, simply press the
corresponding number button, and wait
for a few seconds.
• To select number 10, press 1, 0.
• To select number 23, press 2, 3.
Prohibiting Disc Ejection—Tray Lock
You can prohibit disc ejection from the unit and can lock
discs.
• This operation is possible only while the unit is on with
disc selected as the source.
On the unit ONLY:
To prohibit disc ejection, press 0 while holding 7.
“LOCKED” appears for a while, and the carrousel is locked.
To cancel the prohibition and unlock the discs, press 0
while holding 7.
“UNLOCKED” appears for a while, and the carrousel is
unlocked.
If you try to eject discs
“LOCKED” appears to inform you that the Tray Lock is in use.
EN14-22MX-DVA5[J]_f 01.8.21, 8:51 PM16