JVC MX-DVA5 manual When you have selected, Tuner AM in step Select a preset station Number

English

6 When you have selected		PRESET
“TUNER FM” or
	PREV.
“TUNER AM” in step 5,
select a preset station

	number.
	Press 4 or ¢ to select the preset station
	number, then press SET.		SET
	The unit enters volume setting mode.
7	Press 4or ¢to set the		PRESET
	volume level.
		PREV.

•You can select the volume level from VOL MIN, VOL 1 — VOL 30, and VOL MAX.

Using Recording Timer

NEXT

With Recording Timer, you can make a tape of a radio broadcast automatically. You can set the timer whether the unit is on or off.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified station, sets the volume level to “VOL MIN,” and starts

recording when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes,

NEXT the unit automatically turns off (stands by).

Recording Timer works only once, but the timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting the timer, press CANCEL/DEMO. (However, this does not always work. If CANCEL/DEMO does not work, press CLOCK/TIMER repeatedly and start from step 2 again.)

8	SET
	Press SET to complete the Daily

Timer setting.

The DAILY (daily timer) indicator stops

flashing and remains lit. The settings you have done are shown on the display in sequence for your confirmation.

9 Press	STANDBY/ON to	STANDBY
		STANDBY/ON

turn off the unit (on standby) if you have set the Daily Timer with the unit turned on.

If the unit is turned on when the timer-on time comes

Daily Timer does not work.

To turn on or off Daily Timer after its setting is done

1 Press CLOCK/TIMER repeatedly until	CLOCK
	/ TIMER
“DAILY” appears on the display.
2 To turn off the Daily Timer, press CANCEL/
DEMO.	CANCEL
The DAILY (daily timer) indicator goes off	/DEMO
from the display (“OFF” appears for a while).
The Daily Timer is canceled, but the setting for
the Daily Timer remains in memory.
To turn on the Daily Timer, press SET.	SET
The DAILY (daily timer) indicator lights up on
the display. The settings you have done are
shown on the display in sequence for your
confirmation.

On the unit ONLY:

1 Put a recordable cassette into deck B.

2 Press CLOCK/TIMER repeatedly	/ TIMER
	CLOCK
until “REC” appears on the display.

The indicator lights up and the REC (recording timer) indicator also starts flashing on the display.

•Each time you press the button, the timer setting modes change as follows:

DAILY ON TIME REC

	Canceled		CLOCK	ON TIME
		(See page 10.)
3					CLOCK
	Press CLOCK/TIMER again.				/ TIMER

“ON TIME” appears for 2 seconds, then the unit enters on-time setting mode.

– 35 –