– 34 –

English
2
Press CLOCK/TIMER again.
“ON TIME” appears for 2 seconds, then the
unit enters on-time setting mode.
3
Set the on-time you want the
unit to turn on.
1) Press 4 or ¢ to set the
hour, then press SET.
2) Press 4 or ¢ to set the
minute, then press SET.
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.
4
Set the off-time you want the
unit to turn off (on standby).
1) Press 4 or ¢ to set the hour,
then press SET.
2) Press 4 or ¢ to set the
minute, then press SET.
The unit enters source selecting mode.
5
Press 4 or ¢ to select
the source to play, then press
SET.
• Each time you press 4 or ¢,
the source changes as follows:
TUNER FM: tunes into a specified preset FM station.
= go to step 6.
TUNER AM: tunes into a specified preset AM station.
= go to step 6.
DVD/CD: plays a disc. = go to step 7.
TAPE: plays a tape in deck A or B. = go to step 7.
AUX: plays an external source. = go to step 7.
Using the Timers
There are three timers available — Daily Timer, Recording
Timer, and Sleep Timer.
Before using the timers, you need to set the clock built in the
unit. (See “Setting the Clock” on page 10.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or
radio program. You can set the timer whether the unit is on or
off.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the
preset level gradually, and starts playing the specified source
when the on-time comes (the indicator flashes while the
timer is operating). Then, when the off-time comes, the unit
automatically turns off (stands by).
Daily Timer works every day until you cancel it.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
• If you have made a mistake while setting timer, press
CANCEL/DEMO. (However, this does not always work. If
CANCEL/DEMO does not work, press CLOCK/TIMER
repeatedly and start from step 1 again.)
Before you start...
•When using a disc as the source to play —
– Make sure there is a disc on the currently selected
disc number tray.
•When using a tape as the source to play —
– Make sure that a tape is in the deck whose deck
indicator (A or B) is lit on the display.
•When using the external component as the source to
play —
– Set the timer equipped with the external component at
the same time.
On the unit ONLY:
1
Press CLOCK/TIMER repeatedly
until “DAILY” appears on the
display.
The indicator lights up and the DAILY (daily timer)
indicator also starts flashing on the display.
• Each time you press the button, the timer setting modes
change as follows:
CLOCK
/
TIMER
CLOCK
/
TIMER
DVD/CD
TUNER FM TUNER AM
TAPE
AUX
DAILY
Canceled
ON TIME
ON TIME
CLOCK
(See page 10.)
REC
Continued
PRESET
PREV.
NEXT
SET
PRESET
PREV.
NEXT
SET
PRESET
PREV.
NEXT
SET
EN31-40MX-DVA5[C]_f 01.8.30, 2:37 PM34