– 36 –
English
Recording Timer
7:006:30
Sleep Timer
7:30
AM 6:00

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1

Press SLEEP.

The time length until the shut-off time appears
and the SLEEP indicator starts flashing on the
display.
• Each time you press the button, the time length changes
as follows:
2

Wait for about 5 seconds after specifying the

time length.

The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until “OFF”
appears on the display so that the SLEEP indicator goes off
from the display.
• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are examples.
•If Recording Timer and Daily Timer has the same timer on-
time, Recording Timer has priority over Daily Timer.
•If Sleep Timer overlaps with another timer (either Daily
Timer or Recording Timer), a timer with the earlier shut-off
time has priority.
When using the Recording Timer and Sleep Timer at the
same time, pay special attention to the shut-off time.
4

Set the on-time you want

the unit to turn on.

1) Press 4 or ¢ to set the hour,
then press SET.
2) Press 4 or ¢ to set the minute,
then press SET.
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.
5
Set the off-time you want the
unit to turn off (on standby).
1) Press 4 or ¢ to set the hour,
then press SET.
2) Press 4 or ¢ to set the minute,
then press SET.
The unit enters preset station selecting
mode.
6

Select a preset station.

1) Press 4 or ¢ to select the
band (“TUNER FM” or “TUNER
AM”), then press SET.
2) Press 4 or ¢ to select a preset
channel number, then press SET.
The REC (recording timer) indicator
stops flashing and remains lit. The
settings you have done are shown on the
display in sequence for your
confirmation.
7
Press STANDBY/ON to

turn off the unit (on standby) if

necessary.

If you want to listen to another source while recording
Press REC START/STOP or 7 to stop recording. Without stopping
it, you cannot change the source.
To turn on or off Recording Timer after its setting is
done
1 Press CLOCK/TIMER repeatedly until
“REC” appears on the display.
2 To turn off the Recording Timer, press
CANCEL/DEMO.
The REC (recording timer) indicator goes off
from the display (“OFF” appears for a while).
The Recording Timer is canceled, but the
setting for the Recording Timer remains in
memory.
To turn on the Recording Timer, press SET.
The REC (recording timer) indicator lights up
on the display. The settings you have done are
shown on the display in sequence for your confirmation.
CLOCK
/
TIMER
CANCEL
/DEMO
SET
canceled.
SLEEP10
OFF
(Canceled)
SLEEP20 SLEEP30 SLEEP60
SLEEP90SLEEP120
PRESET
PREV.
NEXT
SET
PRESET
PREV.
NEXT
SET
PRESET
PREV.
NEXT
SET
STANDBY/ON
STANDBY
EN31-40MX-DVA5[C]_f 01.8.30, 2:37 PM36