JVC PIM171200 manual Using TA Standby Reception, Finish the setting, TP/PTY T again

1 Press and hold SEL (S) for more than 2 seconds so that one of the PSM items appears on the display. (See pages 25 and 26.)

SEL

S

2 Select “AF–REG (Alternative frequency/Regionalization reception)” if not shown on the display.

3 Select the desired mode – “AF,” “AF REG” or “OFF.”

4 Finish the setting.

SEL

S

Note:

If a DAB tuner is connected and Alternative Reception (for DAB services) is activated, Network-Tracking Reception is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Reception. (See page 41.)

The same programme can be received on
different frequencies.		ENGLISH
Programme 1	Programme 1
broadcasting	broadcasting
on frequency A	on frequency E

Programme 1 broadcasting on frequency B

Programme 1 broadcasting

on frequency C Programme 1 broadcasting on frequency D

Using TA Standby Reception

TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from the current source (another FM station or CD and other connected components.)

•TA Standby Reception will not work if you are

listening to an AM station.

TP/PTY

T

Press TP/PTY (T) to activate TA Standby Reception.

7When the current source is FM, the TP indicator either lights up or flashes.

•If the TP indicator lights up, TA Standby Reception is activated.

If a station starts broadcasting a traffic announcement, “TRAFFIC” appears on the display, and this unit automatically tunes in to the station. The volume changes to the preset TA volume level (see page 17) and the traffic announcement can be heard.

•If the TP indicator flashes, TA Standby Reception is not yet activated since the station being received does not provide the signals used for TA Standby Reception.

To activate TA Standby Reception, you need to tune in to another station providing these signals. Press ¢ or 4 to search for such a station.

When a station providing these signals is tuned in, the TP indicator stops flashing and remains lit. Now TA Standby Reception is activated.

7When the current source is other than FM, the TP indicator lights up.

If a station starts broadcasting a traffic announcement, “TRAFFIC” appears on the display, and this unit automatically changes the source and tunes in to the station.

To deactivate the TA Standby Reception, press
TP/PTY (T) again.	13