| • | When “CEQ LINK” is set to “LINK ON” |
| ||
ENGLISH |
| The selected sound mode can be stored in |
| memory for the current source. | |
|
| |
|
| Each time you change to the same source, the |
|
| same sound mode is also recalled and shown |
|
| on the display. The CEQ indicator also flashes. |
| • | When “CEQ LINK” is set to “LINK OFF” |
| ||
|
| The selected sound mode effect applies to any |
|
| source. |
Storing your own sound adjustments
You can adjust the sound modes to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Press BAND MODE (M) to make the number buttons work as different function buttons.
BAND
MODE
M
2 Activate custom equalizer (CEQ).
EQ | The last selected sound mode is | |
1 7 | recalled and applied to the | |
| current sound. |
|
| CEQ MO ST | TP PTY |
Ex.: If you have selected “POPS” previously.
3 Select the sound mode you want.
EQ | Each time you press the button, | |
| ||
1 | 7 | the sound modes changes as |
|
| |
follows:
USER 
ROCK 
CLASSIC
JAZZ 
HIP HOP 
POPS
4 Select the items you want to adjust.
SEL | • See page 22 for details. | |
S | ||
|
5 Adjust the level.
To increase the level.
To decrease the level.
CEQ | MO ST RPT | RND | TP PTY |
Equalization pattern changes as you adjust the bass or treble.
Ex.: When you adjust “TRE (treble).”
6 Repeat steps 4 and 5 to adjust the other items.
• To adjust the BBEII level, see page 22.
7 Repeat the same procedure to store other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values listed in the table on page 23.
24
