JVC PIM171200 manual Using the security lock, Registering the password

ENGLISH

Using the security lock

You can prohibit the unauthorized use of this unit by the others.

To use the security lock, you need to set the password first. Once you set the password, the unit will ask you to enter the password when you turn on the unit for the first time after re-installation (or after recovering the car battery exhaustion).

CAUTION: Be careful not to forget the password you have entered; otherwise, you cannot use this unit. Keep the password in your mind and more importantly on paper or some other materials. You can write down your password in the spaces provided on the cover page.

3 Select a letter.

CEQ MO ST RPT RND TP PTY

4 Move the character entry position to the next.

Registering the password

You have to use 4 characters for your password. You can use the following characters: Capital letters (A – Z), small letters (a – z) and numbers (0 – 9).

1 Press and hold both buttons for more than 2 seconds.

SEL

S

The unit enters password entry mode.

CEQ MO ST RPT RND TP PTY

5 Repeat steps 2 to 4 until you enter all 4 characters.

6 Finish the setting.

SEL	The unit returns to the normal
S	operation mode.

CEQ MO ST RPT RND TP PTY

2 Select the character set you want to use.

DISP	Each time you press the button,
D	the character set changes as
	follows:

Capital letter () Small letter () Numbers and symbols ()

How to Use the Provided CODE Sticker

Attach the provided CODE sticker in a conspicuous position on your car to notify would-be unauthorized users that the security lock function is provided for this unit and, therefore, will foil their efforts.

32