JVC RX-884RBK manual Video component connections, Connecting the TV and/or DBS tuner

Video component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack.

If your video components have S-video (Y/C-separation) terminals, connect them using S-video cables (not supplied). Connecting these video components through the S-video input/output terminals will give you better picture playback (or recording) quality.

IMPORTANT:

This receiver is equipped with both the composite video and S-video input/output terminals for connecting video components.

You do not have to connect both the composite video and S-video terminals. However, remember that the video signals from the composite video input terminals are output only through the composite video output terminals, while the ones from the S-video input terminals are output only through the S-video output terminals.

Therefore, if a recording video component and a playing video component are connected to the receiver through the different video terminals, you cannot record the picture from the playing component on the recording component. In addition, if the TV and a playing video component are connected to the receiver through the different video terminals, you cannot view the playback picture from the playing component on the TV.

To view and record the playback picture from the video component connected to the VCR2 jacks, you must connect the TV and the recording video component through the composite video terminals.

Connecting the TV and/or DBS tuner

You can connect either the TV or DBS tuner to the TV SOUND/DBS jacks.

English

RIGHT		LEFT
AUDIO	RIGHT

	To audio output
	Connect the TV to the
	MONITOR OUT jack to
	view the playback picture
	from the other connected
TV	video components.
	To composite video input
	SUBWOOFER
	OUT
	To S-video input

VIDEO

VIDEO S-VIDEO

DVD

TV SOUND

/DBS

OUT

(REC)

VCR 1

IN

(PLAY)

OUT

(REC)

VCR 2

IN

(PLAY)

MONITOR

OUT

Notes:

•	Use the video components of
	the PAL color system.
•	When connecting the TV to
	the TV SOUND/DBS jacks,
	DO NOT connect the TV’s
	video output to these video
	input terminals.
•	When connecting the DBS
	tuner to the TV SOUND/DBS
	jacks, change the source
	name, which will be shown on
	the display when selected as
	the source, to “DBS.” See
	page 18 for details.
•	To enjoy Dolby Digital with the
	DBS tuner as the source,
	connect the DBS tuner using

DBS tuner

TV SOUND

/DBS

DBS

To audio/video output

the method described in

“Digital connections” on page

12.

10