2. Turn MULTI JOG to select the crossover frequency level | MULTI JOG |
| |
according to the size of the small speaker connected, while |
|
the indication of the previous step is still on the display. |
|
As you turn it, the display changes to show the following:
CROSS: 80HzCROSS:100Hz CROSS:120Hz
CROSS: 80Hz | Select this when the cone speaker unit built in the speaker is |
| about 12 cm (4 3/4 inches). |
CROSS:100Hz | Select this when the cone speaker unit built in the speaker is |
| about 10 cm (3 15/16 inches). |
CROSS:120Hz | Select this when the cone speaker unit built in the speaker is |
| about 8 cm (3 3/16 inches). |
|
|
Low Frequency Effect Attenuator Setting
If the bass sound is distorted while playing back a source using Dolby Digital, follow the procedure below.
On the front panel only:
1. Press SETTING repeatedly until “LFE ATT” (Low | SETTING |
| |
Frequency Effect Attenuator) appears on the display. |
|
The display changes to show the current setting.
2. Turn MULTI JOG to select the low frequency effect | MULTI JOG |
attenuator level, while the indication of the previous step is |
|
still on the display. |
|
As you turn it, the display changes to show the following:
LFE ATT: 0dB LFE ATT:10dB
LFE ATT: 0dB | Normally select this. |
|
|
LFE ATT:10dB | Select this when the bass sound is distorted. |
|
|
Dynamic Range Compression Setting
You can compress the dynamic range (difference between maximum sound and minimum sound) of the reproduced sound. This is useful when enjoying surround sound at night.
On the front panel only:
SETTING
1.Press SETTING repeatedly until “D. RANGE COMP.” (Dynamic Range Compression) appears on the display. The display changes to show the current setting.
2. Turn MULTI JOG to select the appropriate item about the | MULTI JOG |
compression level, while the indication of the previous step |
|
is still on the display. |
|
As you turn it, the display changes to show the following:
COMP.: OFF COMP.: MID COMP.: MAX
COMP.: OFF | Select this when you want to enjoy surround with its full |
| dynamic range. (No effect applied.) |
|
|
COMP.: MID | Select this when you want to reduce the dynamic range a |
| little. (Factory setting.) |
|
|
COMP.: MAX | Select this when you want to apply the compression effect |
| fully. (Useful at night.) |
|
|
English
Note:
This function takes effect only when playing back a source using the Dolby Digital.
Note:
This function takes effect only when playing back a source using the Dolby Digital.
22