English
Table of Contents
Parts Identification | 3 |
Getting Started | 4 |
Before Installation | 4 |
Checking the Supplied Accessories | 4 |
Connecting the FM and AM (MW/LW) Antennas | 5 |
Connecting the Speakers | 6 |
Connecting Audio/Video Components | 9 |
Connecting the Power Cord | 13 |
Putting Batteries in the Remote Control | 13 |
Basic Operations | 14 |
Turning the Power On and Off (Standby) | 14 |
Selecting the Source to Play | 14 |
Adjusting the Volume | 15 |
Selecting the Front Speakers | 16 |
Muting the Sound | 16 |
Recording a Source | 16 |
Attenuating the Input Signal | 17 |
Adjusting the Subwoofer Output Level | 17 |
Basic Settings | 18 |
Changing the Source Name | 18 |
Selecting the Input Mode | 18 |
Adjusting the Front Speaker Output Balance | 19 |
Setting the Subwoofer Information | 19 |
Listening at Low Volume (Loudness) | 19 |
Digital Input (DIGITAL IN) Terminal Setting | 20 |
Setting the Speakers for the DSP Modes | 20 |
One Touch Operation | 23 |
About the One Touch Operation | 23 |
Using the One Touch Operation | 23 |
Receiving Radio Broadcasts | 24 |
Tuning in Stations Manually | 24 |
Using Preset Tuning | 24 |
Selecting the FM Reception Mode | 25 |
Assigning Names to Preset Stations | 26 |
Using the RDS (Radio Data System) to Receive FM Stations | 27 |
What Information Can RDS Signals Provide? | 27 |
Searching for a Program by PTY Codes | 28 |
Switching to a Broadcast Program of Your Choice Temporarily | 30 |
1
