Using the DSP Modes
English
From the remote control:
1. Select and play the source encoded with Dolby Digital (bearing the mark
) or with Dolby Surround (bearing the mark DOLBY SURROUND ).
D I G I T A L
•When you play back the source encoded with Dolby Digital and select the digital input for that source, the Ù DIGITAL indicator lights up on the display.
2. Press SURROUND MODE repeatedly until the mode — 3D | SURROUND |
ACTION (or 3D DIGITAL), 3D DRAMA, or 3D THEATER | MODE |
| |
— you want appears on the display. |
|
Each time you press the button, the DSP modes change as follows (the
When the digital input is selected to play the source encoded with Dolby Digital:
DOLBY DIGITAL DIG-THEATER
OFF 3D DIGITAL HEADPHONE
For other sources:
PRO LOGIC THEATER LIVE CLUB DANCE CLUB HALL
OFF
PAVILION
3D THEATER 3D DRAMA 3D ACTION HEADPHONE
Note:
The
Notes on the indications:
• | The indicator of the selected |
| DSP mode also lights up on |
| the display while selecting. |
• | The PRO LOGIC indicator |
| lights up when the Dolby Pro |
| Logic decoder built in this |
| receiver is activated. |
• | The Dolby Pro Logic decoder |
| is used not only for the analog |
| sources but also for the |
| sources encoded with Dolby |
| Digital in the following cases: |
| – When only front channel |
| signals are encoded. |
3.Press SOUND CONTROL.
10 keys are activated for sound adjustments.
4.Press EFFECT to select the effect level.
Each time you press the button, the effect level changes as follows:
DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3
DSP EFFECT 5 | DSP EFFECT 4 |
As the number increases, the selected
To cancel the
Press SURROUND MODE repeatedly until “OFF” appears. The
SOUND
CONTROL
EFFECT
7/P
– When front channel and |
monaural rear channel |
signals are encoded. |
While the Dolby Pro Logic is activated for this type of Dolby Digital source, the Ù DIGITAL indicator goes off.
Note:
Once you have adjusted the 3D- PHONIC modes, it is memorized for each
37