JVC RX-884RBK Entering the Disc Information, For the CD Player with the disc memory function

TEXT COMPU LINK Remote Control System

English

Entering the Disc Information

For the CD Player with the disc memory function:

You can use the disc memory function through this receiver.

The disc information (its performer, disc title, and its music genre) of normal audio CDs will be stored into the memory built in the CD player.

For the disc memory function, refer to the manual supplied with your CD player.

•The performer, disc title, and music genre information are usually recorded in a CD Text. However, if a CD Text has no genre information recorded in the disc itself, you can input its music genre by yourself.

Note: You can enter the TITLE INPUT screens for a CD Text and input its titles. However, you cannot store the titles you have input for a CD Text.

Example: Entering the following information for Disc 1

Performer: “MICHEAL”

Disc title: “MY FAVORITE”

1.Display the disc information screen by following the procedure on page 57.

2.Press ON SCREEN CONTROL %/ Þ to move to “TITLE INPUT,” then press SET.

The TITLE INPUT: PERFORMER screen appears on the TV.

3.Press ON SCREEN CONTROL % / Þ / @/ # to move in front of a character you want, then press SET to enter the character.

• If the current CD is a CD Text, go to step 5 without entering the performer.

To use the lower case letters, press ON SCREEN CONTROL %/ Þ / @/ #to

move to SHIFT , then press SET.

To use the upper case letters again, press ON SCREEN CONTROL %/ Þ / @ / #

to move to SHIFT , then press SET.

4.Repeat step 3 until you finish putting a name (up to 32 characters) to this User File.

To insert a space, press ON SCREEN CONTROL %/ Þ / @/ #to move to SPACE , then press SET.

To correct an incorrect character:

1)Press ON SCREEN CONTROL % / Þ / @/ # to move to or , then press SET until the incorrect character is selected.

2)Press ON SCREEN CONTROL % / Þ / @/ # to move to CANCEL, then press SET to erase the character.

3)Press ON SCREEN CONTROL % / Þ / @/ # to move in front of an correct character, then press SET to enter a correct character.

5.Press ON SCREEN CONTROL % / Þ / @/ # to move to “DISC1:

MICHEAL (in this example),” then press SET. The TITLE INPUT: DISC TITLE screen appears.

6.Enter the disc title, referring to steps 3 and 4.

• If the current CD is a CD Text, go to the next step without entering the disc title.

TITLE INPUT: PERFORMER screen

￿

￿

TITLE INPUT: DISC TITLE screen

￿

￿

￿

61