JVC RX-884RBK manual SOFT2 SOFT1 Flat SHARP1

5.Press BALANCE/SURROUND ADJUST repeatedly until “CENTER TONE” appears on the display.

The display changes to show the current setting.

6.Turn MULTI JOG to select the center tone level you want, while the indication of the previous step is still on the display.

The center tone adjustment affects the mid-frequency range, which the human voice is mostly made up of. As you turn it, the display changes to show the following:

BALANCE/SURROUND

ADJUST

MULTI JOG

English

SOFT2 SOFT1 FLAT SHARP1

7.Press BALANCE/SURROUND ADJUST repeatedly until “DSP EFFECT” appears on the display.

The display changes to show the current setting.

8.Turn MULTI JOG to select the effect level, while the indication of the previous step is still on the display. As you turn it, the effect level changes as follows:

SHARP2

BALANCE/SURROUND

ADJUST

MULTI JOG

Note:

You cannot adjust the effect level when “REAR SPK” is set to “NONE” (see page 20).

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5 DSP EFFECT 4

As the number increases, the surround effect becomes stronger.

To cancel the Theater Surround mode

Turn MULTI JOG until “DSP OFF” appears in step 3. The DSP and THEATER indicators goes off.

46