Searching for a Program by PTY Codes
One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.
To search for a program using the PTY codes
English
Note:
FM stations must be preset to use the PTY codes.
On the front panel:
1.Press PTY SEARCH while listening to an FM station.
“PTY SELECT” flashes on the display.
2.Turn MULTI JOG until the PTY code you want appears on the display while “PTY SELECT” is flashing.
As you turn it, the display gives you the PTY codes described on page 29.
PTY SEARCH
MULTI JOG
3. Press PTY SEARCH again while the PTY code selected in | PTY SEARCH |
the previous step is still on the display. |
|
While searching, “SEARCH” and the selected PTY code alternate on the display.
The receiver searches 40 preset channels, stops when it finds the one you have selected, and tunes in that station.
To continue searching after the first stop
Press PTY SEARCH again while the indications on the display are flashing. If no program is found, “NOTFOUND” appears on the display.
To stop searching any time during the process
Press PTY SEARCH while searching.
28