Basic Settings
CONTROL
5/°/3/2 Display
STANDBY |
|
|
POWER | HOME THEATER RECEIVER |
|
| CONTROL |
| ANALOG | L | C | R | PRO LOGIC | SLEEP | TUNED | ST | AUTO | MUTING |
|
|
|
|
|
|
| LPCM | SUBWFR LFE DSP |
|
|
|
| MH |
|
|
| |||
|
|
|
| DOLBY D | LS | S | RS | DGTL AUTO |
|
|
|
| KH | INPUT | SURROUND | DSP |
SETTING | ADJUST |
| MEMORY | DTS | INPUT ATT |
|
|
|
| VOL | ||||||
|
|
|
|
|
|
|
|
|
|
| ANALOG/DIGITAL | ON/OFF | MODE | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MASTER VOLUME |
|
|
|
|
|
|
|
|
|
|
|
|
|
| INPUT ATT |
|
|
D I G I T A L |
|
|
| DVD |
|
| TV | VCR | CD | FM |
|
| AM |
|
| |
|
|
|
|
|
|
|
|
|
| |||||||
S U R R O U N D D I G I T A L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SETTING |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
3Press CONTROL 3(or 2) to select the delay time.
•Each time you press the button, the delay time changes by “1 mS (msec).”
CONTROL
2Press CONTROL ° (or 5) repeatedly until “CROSS (Crossover)” (with the current setting) * appears on the display.
CONTROL
ANALOG | L | C | R PRO LOGIC | ||
LPCM | SUBWFR LFE DSP | ||||
DOLBY D | LS | S | RS | DGTL AUTO | |
DTS | INPUT ATT | ||||
|
|
| |||
GIC
UTO |
|
TT | VOL |
VOL 
Ex.: When adjusting the center delay
4Repeat steps 2 and 3 to adjust the other delay time.
Crossover Frequency — CROSS
Small speakers cannot reproduce the bass sounds efficiently. If you use a small speaker in any position, this receiver automatically reallocates the bass sound elements assigned to the small speaker to large speakers.
To use this function properly, set this crossover frequency level according to the size of the small speaker connected.
•If you have selected “LRG (large)” for all speakers, this function will not take effect.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1Press SETTING.
*“100HZ” is the initial setting. If you have already changed the setting, another frequency will be shown.
3Press CONTROL 3 (or 2) to select the crossover frequency level.
•Each time you press the button, the crossover frequency level changes as follows:
CONTROL |
|
|
|
| |
ANALOG | L | C | R | PRO LOGIC |
|
LPCM | SUBWFR LFE | DSP |
| ||
DOLBY D | LS | S | RS | DGTL AUTO | VOL |
DTS | INPUT ATT | ||||
• Use the following criteria as reference when adjusting:
80HZ: Select this frequency when the cone speaker unit built in the speaker is about 4 3/4 inches (12 cm).
100HZ: Select this frequency when the cone speaker unit built in the speaker is about 3 15/16 inches (10 cm).
SETTING
The CONTROL buttons now work for basic settings.
120HZ: Select this frequency when the cone speaker unit built in the speaker is about 3 3/16 inches (8 cm).
14
