Tuner Operations
You can also use the remote control for some tuner operations.
• When using the remote control, see also “Mastering Remote Operations” on page 32.
CONTROL
5/°/3/2 Display
STANDBY |
|
|
POWER | HOME THEATER RECEIVER |
|
|
| CONTROL |
| ANALOG | L | C | R | PRO LOGIC | SLEEP | TUNED | ST | AUTO | MUTING |
|
|
|
|
|
|
|
| LPCM | SUBWFR LFE DSP |
|
|
|
| MH |
|
|
| |||
|
|
|
|
| DOLBY D | LS | S | RS | DGTL AUTO |
|
|
|
| KH | INPUT | SURROUND | DSP |
| SETTING | ADJUST |
| MEMORY | DTS | INPUT ATT |
|
|
|
| VOL | ||||||
|
|
|
|
|
|
|
|
|
|
|
| ANALOG/DIGITAL | ON/OFF | MODE | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MASTER VOLUME |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| INPUT ATT |
|
|
D I G I T A L |
|
|
|
| DVD |
|
| TV | VCR | CD | FM |
|
| AM |
|
| |
|
|
|
|
|
|
|
|
|
|
| |||||||
S U R R O U N D | D I G I T A L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MEMORY | Source selecting buttons |
| (FM, AM) |
Tuning in Stations Manually | Remote |
NOT |
1Press FM or AM to select the band.
The last received station of the selected band is tuned in, and the CONTROL buttons now work for tuner operations.
FM | TUNED | ST | AUTO | MUTING |
AM |
|
| MHZ |
VOL |
Ex.: When selecting the FM band
Using Preset Tuning
Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.
To store the preset stations | Remote |
Before you start, remember... | NOT |
|
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
2Press CONTROL ° (or 5) repeatedly until “< TUNING >” appears on the display.
CONTROL
TUNED ST AUTO MUTING
VOL 
Then
TUNED | ST | AUTO | MUTING |
|
|
| MHZ |
VOL |
1Tune in the station you want to preset (see “Tuning in Stations Manually”).
•If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the FM Reception Mode” on page 21.
ANALOG L |
| R | TUNED ST AUTO MUTING | |
|
|
|
|
|
MHZ |
VOL |
2Press MEMORY.
3Press repeatedly or hold CONTROL 3or 2 until you find the frequency you want.
The channel number position starts flashing on the display for about 10 seconds.
MEMORY
CONTROL
TUNED ST AUTO MUTING
MHZ
VOL 
TUNED ST AUTO MUTING
MHZ |
VOL |
•Pressing (or holding) CONTROL 3increases the frequencies.
•Pressing (or holding) CONTROL 2decreases the frequencies.
3Press CONTROL 3 (or 2) to select a channel number while the channel number position is flashing.
Notes:
•When you hold and release CONTROL 3 or CONTROL 2, the frequency keeps changing until a station is tuned in.
•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.
•When an FM stereo program is received, the ST (Stereo) indicator also lights up.
CONTROL
TUNED ST AUTO MUTING
MHZ |
VOL |
20
