Basic Settings
CONTROL
5/°/3/2 Display
STANDBY |
|
|
POWER | HOME THEATER RECEIVER |
|
| CONTROL |
| ANALOG | L | C | R | PRO LOGIC | SLEEP | TUNED | ST | AUTO | MUTING |
|
|
|
|
|
|
| LPCM | SUBWFR LFE DSP |
|
|
|
| MH |
|
|
| |||
|
|
|
| DOLBY D | LS | S | RS | DGTL AUTO |
|
|
|
| KH | INPUT | SURROUND | DSP |
SETTING | ADJUST |
| MEMORY | DTS | INPUT ATT |
|
|
|
| VOL | ||||||
|
|
|
|
|
|
|
|
|
|
| ANALOG/DIGITAL | ON/OFF | MODE | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MASTER VOLUME |
|
|
|
|
|
|
|
|
|
|
|
|
|
| INPUT ATT |
|
|
D I G I T A L |
|
|
| DVD |
|
| TV | VCR | CD | FM |
|
| AM |
|
| |
|
|
|
|
|
|
|
|
|
| |||||||
S U R R O U N D D I G I T A L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SETTING |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Remote | 3 Press CONTROL 3 (or 2) to select “ON.” |
| |||||
Setting Auto Surround | NOT |
| ||||||
|
|
| • Each time you press the button, Auto Surround turns “ON” or | |||||
Surround mode is automatically activated when a multichannel |
| “OFF.” |
|
|
|
|
| |
digital signal comes into this receiver through the digital terminal. |
| CONTROL |
|
|
|
| ||
You can enjoy Surround mode simply by selecting the source (with |
|
|
|
|
|
|
| |
digital input selected for that source) — Auto Surround. |
|
| ANALOG | L C | R PRO LOGIC |
|
| |
|
|
| LPCM | SUBWFR LFE DSP |
|
| ||
To activate Auto Surround, follow the procedure below. |
|
| DOLBY D | LS S | RS | DGTL AUTO |
| VOL |
|
| DTS | INPUT ATT |
| ||||
|
|
|
|
|
|
|
|
|
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1Press SETTING.
SETTING | The CONTROL buttons now work for basic |
| |
| settings. |
2Press CONTROL ° (or 5) repeatedly until “AUTO SR (Auto Surround)” (with the current setting)* appears on the display.
CONTROL
O LOGIC |
|
P |
|
TL AUTO |
|
UT ATT | VOL |
*“OFF” is the initial setting. If you have already changed the setting, “ON” will be shown.
ON : • If multichannel signals come in, an appropriate
Surround mode will be turned on
•If Dolby Digital 2 channel or DTS 2 channel signals come in, “STEREO” will be selected.
•If linear PCM signals come in, nothing will change.
OFF : Select this to deactivate Auto Surround.
Notes:
•This function does not take effect in the following cases:
–While playing an analog source.
–While selecting “DGTL DTS” or “DGTL D.D.” as the fixed digital input mode (see page 11).
•If Surround mode is automatically activated by Auto Surround, another DSP mode in use will be canceled temporarily. When multichannel digital signals stop coming in, the selected surround mode is canceled, and the previous DSP mode resumes.
•If you press SURROUND ON/OFF (SURROUND on the remote control) or DSP MODE with Auto Surround activated, Auto Surround will be canceled temporarily for the currently selected source.
Auto Surround setting will be restored in the following cases.
–When you turn off and on the unit,
–When you change the source, and
–When you reset “AUTO SR” to “ON” again.
To cancel Auto Surround
Repeat step 1 and 2, then select “OFF” in step 3.
16