Adjusting the Tone

Remote

NOT

You can adjust the bass and treble sounds as you like.

• You have to make these adjustments for each source.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1Press ADJUST.

ADJUSTThe CONTROL buttons now work for sound adjustments.

2Press CONTROL °(or 5) repeatedly until “BASS” or “TREBLE” (with the current setting)* appears.

CONTROL

Adjusting the Subwoofer Output Level

You can adjust the subwoofer output level if you have connected a subwoofer and set the subwoofer information correctly – “YES.”

• You have to make this adjustment for each source.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1Press ADJUST.

ADJUSTThe CONTROL buttons now work for sound adjustments.

2Press CONTROL ° (or 5) repeatedly until “SUBWFR (subwoofer)” (with the current

setting)* appears.

CONTROL

Sound Adjustments

ANALOG

L

C

R

PRO LOGIC

 

 

LPCM

SUBWFR LFE DSP

 

OGIC

DOLBY D

LS

S

RS

DGTL AUTO

VOL

 

DTS

INPUT ATT

AUTO

ATT VOL

 

 

 

 

 

* “0” is the initial setting. If you have already changed the

 

 

 

 

 

 

 

 

 

 

setting, another number (level) will be shown.

 

 

 

 

 

3 Press CONTROL 3or 2to adjust the sound

BASS : To adjust the bass.

TREBLE : To adjust the treble.

*“0” is the initial setting. If you have already changed the setting, another number (level) will be shown.

3Press CONTROL 3 or 2to adjust the sound level.

CONTROL

ANALOG

L

C

R

PRO LOGIC

 

LPCM

SUBWFR LFE DSP

 

DOLBY D

LS

S

RS

DGTL AUTO

VOL

DTS

INPUT ATT

Ex.: When adjusting the bass level

Pressing CONTROL 3increases the sound level by +2 steps (from –10 to +10).

Pressing CONTROL 2decreases the sound level by –2 steps (from +10 to –10).

output level.

CONTROL

ANALOG

L

C

R

PRO LOGIC

 

LPCM

SUBWFR LFE DSP

 

DOLBY D

LS

S

RS

DGTL AUTO

VOL

DTS

INPUT ATT

Pressing CONTROL 3increases the sound output level (from –10 to +10).

Pressing CONTROL 2decreases the sound output level (from +10 to –10).

When using the remote control

1Press SOUND.

10 keys now work for sound adjustments.

2Press SUBWOOFER +/– to adjust the sound output level (from –10 to +10).

4Repeat steps 2 and 3 to adjust the other sound level.

19

Page 21
Image 21
JVC RX-E100SL manual Sound Adjustments, Adjusting the Tone, Adjusting the Subwoofer Output Level